BS1363-1 Cyclic Loading Test 20A Of Plugs For Charging Electric Vehicles 250 Voltage
|
...Cyclic Loading Test 20A of Plugs for Charging Electric Vehicles 250 Voltage Product information: The test apparatus conforms to BS1363-1:2016+A1:2018 BS1363-1:2016+A1: clause 27, BS1363-2 clause 26 and Annex G. Technical parameters: Item Parameters Power supply 220V/AC50HZ 3A Test Cycles 28 cycles,0-9999 can be preset ON/OFF Time ON 8h, OFF1h, ON 8h, OFF7h,every cycle LOAD......
Sinuo Testing Equipment Co. , Limited
|
Three - Position Switch Plug And Socket Life Test Machine Load Test For Plug Socket Tester
|
...IEC60884, IEC61058, IEC606691 standards and etc. It is applicable for household and similar fixed electrical installations switches and plug sockets breaking capacity and normal operation test, the rated voltage of the switch is not greater than 280V and...
Guangzhou HongCe Equipment Co., Ltd.
|
DIN-VDE0620-1-bild 16d Temperature rise test plug AC 16A/2.5A
|
... EN 12167, nickel plated Contact bridge: Cu, 2.5mm2 When testing products with additional electronic functions when an operating voltage is required, the test plug together with a line of 1.5 mm2 must be provided with a length of 1m and corresponding load....
HongKong Bonad Technology Limited
|
Lightweight Switching Power Supply Adapter High Efficiency Full Load Test
|
...Plug-in Wall In-Line Switching Power Supply Adapter GQ12 USB OVERVIEW Place of Origin:Chengdu,China Model Number:GQ12 Appearance:L:45* W:35* H:25mm AC Input Voltage:AC90V~264V 47~63HZ AC Input Current:0.4Amax,@100VAC/60HZ full load test AC Input Surge Current:40A(RMS)maximum for AC 230V/50HZ full load test Maximum Power:12W(Output5.0V 2.4A Max) Input Voltage:AC90-V264V 50HZ/60HZ Output Load......
Chengdu Haoli Electronic Technology Co.,Ltd.
|
Grey Cold Shrink Termination Kit , Low Voltage Termination Kit TLS JLS
|
1kV Cold Shrinkable Termination kits TLS JLS , Silicon Rubber 1. Product Introduction 1kV Cold Shrinkable Termination kits TLS JLS , Silicon Rubber , 1kV cold shrink power cable terminations and joints are consist of cold shrink tube and cold shrink ......
Suzhou Tongjin Polymer Material Co.,Ltd
|
Wire Spark Testing Equipment , Cable Testing Equipment For Rubber / Plastic Wire
|
...Testing Equipment, 0~30 KV Wire Test Machine Description: Cable and Wire Spark Testing Equipment is a synchronous weakness test instrument.let a setting voltage values loaded on insulation cyclically and the conductor connect the ground. So there’s a voltage difference between conductor and insulation to test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Load Current Temperature Rise Test Equipment For Cord Sets And Power Supply Cords
|
...Testing Equipment The test plug of the machine is under a certain load current to measure the temperature of the conductor surface and detect its load. Meet the standard: The plug temperature rise tester is designed according to the technical requirements of UL-817, IEC0620 plug wire and national standard. Scope of application: It is mainly applicable to the withstand voltage temperature rise test...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Gauges For Plugs And Socket-Outlets Test In Thai Industrial Standard TIS 166-2549 (2006)
|
TIS 166-2549 (2006) Thai Industrial Standard for PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES : PLUGS AND SOCKET-OUTLETS WITH RATED VOLTAGE NOT EXCEEDING 250 V 1. Scope 1.1 This standard applies to plugs and fixed socket-outlets or portable ......
KingPo Technology Development Limited
|
Manual Electrical Test Equipment Plug Cord Compression Tester 150N / 300N Load Weight
|
... for testing the withstand voltage of power plugs in the item of protection against electric shock and mechanical strength. The test method is to apply the weight required in the standard plug or socket, after a certain period of time, the power plug or...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
GB/T1002-2021 Single Phase Plug Socket Tester contact Gauge
|
...Plug and Socket-Outlet Test Gauges 1. Introduction The single phase plug and socket-outlet test Gauges are designed according to GB1002-2021 figures 8/9/10/11/12/13/14/15/16. They are applicable to verify the single phase plugs and fixed or mobile socket-outlets for household with an AC frequency of 50 Hz, rated voltage of 250 V, rated current not exceeding 16A. 2. Parameter Standard/figure number Gauge name Qty Test...
Pego Electronics (Yi Chun) Company Limited
|
Submit your “250 voltage cyclic loading test plugs” inquiry in a minute :