CNC Cutting 3 Flute Carbide End Mills , Tungsten Carbide Milling Cutters
|
CNC Cutting Tungsten Carbide Endmills with 3 Flutes Cutters Features: 1. Raw Material: Ultra Fine Micro grain with Diameter less than 0.4UM 2. Chemical Composition 6%-12% Cobalt 3. Strength 2500-4000N/mm2 Controlling Mode CNC 4. Density14.45-14.90g/cm3 5. ......
ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD.
|
HRA92.5 Cemented Carbide Milling Blanks 12% Cobalt For Making End Mills
|
...Carbide Milling BlanksHRA92.5 cemented carbide milling blanks for reamer making end mills ISO Grain size Cobalt Density Hardness T.R.S k1C Code μm % g/cm3 HRA N/mm2 Mpa.m1/2 K40-K50 0.4 12 14.12 92.5 4200 10.2 Application: Ultra-fine grain size, with good wear-resistant and toughness, especially suitable for finishing and processing alloy steel, aluminum alloy, titanium alloy etc. Suitable for making end mills......
Zhuzhou TGC Cemented Carbide Co.,Ltd.
|
Full Shine K20 Titanium Tungsten Carbide Milling Inserts CVD PVD YG6 Bit
|
Tungsten Carbide Carbides And Titanium Carbides Carbides Carbide Milling Inserts Grade Information: Santon Grade ISO Grade ANSI Grade Physical and Chemical Property Performance & Applications Density TRS Hardness g/cm3 n/mm2 HRA YG6 K20 C2 14.9 2050 90.5 ......
Chengdu Santon Cemented Carbide Co., Ltd
|
Cnc Machine Tools Carbide Milling Cutter HRC50 2 Flutes End Mill
|
...: tungsten carbide b, TRS: >3600 N/mm2 c, HRA: 91.8-92.4, HRC:45/55/60/65 d, Grain size: 0.2-0.6μm e, Helix angle: 30°-45 ° Diameter of ......
JYC technology Co.,Ltd
|
Flattened Long Shank End Mill , 6 Flute Carbide End Mill 2500-4000N/Mm2 Flexural
|
6-flute flattened end mills with long straight shank for high hardness steel HMX series for machining high hardness steel Wide applicaiton: suitable for Side face, Step shoulder, Straight slot, especially very suitable for side milling and shallow slot ......
Benemetal Material Technology Co.,Ltd
|
Straight Shank Carbide Milling Cutter Cobalt End Mill Four Flute End Mill
|
... tolerance extent control. We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the...
Dongguan Diamond Hardware Factory
|
Carbide Multi Flutes End Mills / Tungsten Carbide Milling Cutters
|
Carbide Multi Flutes End Mills / Tungsten Carbide Milling Cutters 1. Super-Fine Micrograin carbide rod: WC=92.5%, Co=12.5%, TRS>4200N/mm2; Hardness>92.5HRA, Grain size: 0.5um; High qulaity of wearability and impact 2. Made by world latest 5-AXIS tools grinding machine, promise the quality and precision of cutter. 3. Super TiAlN, reduce the coeffiction of friction, and improve the tools life much. 4. Each end mill......
ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.
|
HRC55 Carbide Milling Cutter Square End Mill With 30° - 45 ° Helix Angle
|
HRC55 Carbide Milling Cutter,Dovetail end mill cutter,Square End Mill 1.Original raw micro grain material, high hardness and T.R.S. a, Material: tungsten carbide b, TRS: >3600 N/mm2 c, HRA: 91.8-92.4, HRC:45/55/60/65 d, Grain size: 0.2-0.6μm e, Helix angle......
INMIND TOOLS CO.LTD
|
Aluminum Machining Flat End Mill / 2 Flutes Solid Carbide Milling Cutters D1-D12
|
1. Super Raw Material HRC45 HRC55 HRC60 HRC65 YG10X YG10.2 &WF25(Taiwan) K44 & K40 (German) H10F (Sweden) Grain Size:0.7um Co:10 % Flexural strength:3320N/mm2 Grain Size:0.6um Co:10 % Flexural strength:4000N/mm2 Grain Size:0.5um Co:12 % Flexural strength:......
Supal (Changzhou) Precision Tools Co.,Ltd
|
yellow Cemented Carbide Milling Cutters Rods DURANA coating
|
GRADES OF CEMENTED CARBIDE RODS AND BARS ISO CORRESPONDING WC% Co% Density g/cm3 Hardness HRA TRS N/mm2 WC grain size K10 94 6 14.90 92.5 >=3000 FINE GRAIN K05-K10 94 6 14.85 93.0 >=3500 ULTRA-FINE GRAIN K20-K30 92 8 14.65 92.6 >=3600 ULTRA-FINE GRAIN K30-......
Zhuzhou Aohua Tools Co.,Ltd.
|
Submit your “2500 n mm2 carbide milling” inquiry in a minute :