High Reliability Stability 2x2 Channels Fiber Optic Switch Opto Mechanical
|
...Optical Switch High Reliability Stability 2x2 Channels Bypass Opto-Mechanical Optical Switches 2X2B Opto-Mechanial Optical Switch The 2x2B Opto-Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting 2 incoming optical signals into 2 output fibers. This is achieved using a opto-mechanical configuration and activated via an electrical control signal. The switch......
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
2x2 MEMS Fiber Optical Switch Dia 250um 900um Wavelength 1310 / 1550Nm
|
2x2 MEMS optical Switch fiber dia 250um or 900um wavelength 1310/1550 nm and other E MEMS2X2 Optical Switch.ppt..pptx Features: Application High Reliability Channel Blocking Latching Configurable Add/Drop Intrinsic tolerance to ESD Instrumentation Description The MEMS Latch Series 1x8 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers......
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
D2x2B Multimode Optical Switches 850nm Dual 2x2 Bypass , Fiber Optic Switches
|
...Optical Switches 850nm Dual 2x2 Bypass , Fiber Optic Switches GEZHI Photonics Dual 2x2B Multi-Mode Mechanichal Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. GEZHI’s Dual 2x2B (D2x2B) MM Mechanichal Optical Switch support all wavelength at Multimode 850nm wavelength, it offers ultra-high reliability, low insertion loss, fast switching......
Gezhi Photonics Co.,Ltd
|
Non Latching 500MW 1550nm 2x2 Bypass Fiber Optic Switch
|
...Fiber Optic Switch bypass with board PCB Board Hilink 2x2 Fiber Optic bypass switch module packing in a Metal case available for high operating temperature. Its comes with 1310&1550nm singlemode Non-Latching type SC/APC pigtailed. 2x2 Bypass Fiberoptic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber......
Shenzhen HiLink Technology Co.,Ltd.
|
Non Latching 2x2 Bypass Fiber Optical Switch 1310/1550nm For Add Drop
|
...2x2 Bypass Optical Switch Non-Latching 1310/1550nm for Optical Add/Drop 2x2 Mechanical Optical Switch is used to turn on, turn off and switch optical signal. The 2x2 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future. Features Applications Unmatched Low Cost Optical...
Shenzhen Unifiber Technology Co.,Ltd
|
1X1 Channel Fiber Optical Switch Latching Single Mode
|
...Channel Fiber Optical Switch Latching Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical......
HTD Fibercom Co., Limited
|
Mechanical Fiber Optical Switch SM 1310nm 1550nm 1m 900um 1x1 1x2 2x2
|
...Optical Switch SM 1310/1550nm 1m 900um FC/APC Description 1xN mechanical fiber optic switch manufactured by ANC International Co., Limited connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching......
ANC International Co., Limited
|
UPC Polish SMF Non Latching Full 2x2 Fiber Optical Switches
|
...2x2 Optical Switches Iis through and Cross optical state. Its used in Channel Blocking, Configuration add/drop solution with low optical distortions and high reliability. The optical path through the units is purely optical; i.e. there is no optical to electrical to optical conversion. There is no electrical loss or electrical bandwidth limit on the fiber optic path. The optical path will redirecting an incoming optical......
Shenzhen linkopto Technology Co. Ltd
|
1x8 Polarizing Fiber Optic Switches AC 220V 288mm×260mm×117mm
|
...Fiber Optic Switches AC 220V 288mm×260mm×117mm 1*8 single-mode optical switch is a device with multi-channel optical path switching function, which mainly has the following uses: ▲Multi-channel optical monitoring in optical transmission system; ▲LAN multi-light source/detector automatic switching, light sensing multi-point dynamic monitoring system; ▲ Optical test system for optical fiber, optical......
Guangzhou UC Instruments., Co. Ltd.
|
Fiber Optic Switch FSW Device 1x2 Mechanical Optical WDM 850 1310 1550 Test Wavelength
|
... route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its...
COMELINK CO.,LTD
|
Submit your “2x2 channels fiber optic switch” inquiry in a minute :