30° Helix Angle Roughing End Mill With 4 Cutting Edges For Efficient Carbide Milling
|
Product Description: Carbide Roughing End Mills Carbide roughing end mills are typically made from solid carbide, a hard and durable material that is able to withstand high cutting speeds and temperatures, making it suitable for demanding machining ......
Supal (Changzhou) Precision Tools Co.,Ltd
|
16mm 4 Flute 45° Helix Angle Carbide End Mill Bits Blue Nano Coated Flat End Milling Cutter for Steel CNC Machine Tool
|
... nano coating is engineered for professional-grade CNC machining of steel, stainless steel, and hard alloys. This high-performance flat end milling cutter delivers exceptional precision, durability, and cutting efficiency, making it an essential tool for...
Changzhou AMG Precision Tool Manufacturing CO., LTD
|
3 Flute Tungsten Carbide Milling Bits 35° Helix Angle Carbide End Mills
|
Milling cutters/end mills are broadly divided into: 1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing; 2. Ball end milling cutter/end mill: semi-......
ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.
|
30 Helix Altin Coated End Mill Ball Nose 10mm Carbide End Mill
|
...End Mill R5 with AlTiSiN Coating for Alloy Steel Product name RLD HRC55 2 flutes 10mm ball nose end mill Specification R5*20*75*10D*2F Suitable for Alloy steel, iron, cast iron, common steel under HRC50, etc. Machine type CNC Milling Machine Flutes 2 Coating AlTiSiN Helix 30 degree Co 12% HRA 92.2 TRS Min(N/mm²) 3800 Tolerance Within 0/-0.02mm Processing machine ANCA/ Carbide Raw Material Introduction End...
Changzhou Ruilida Tools Co., Ltd.
|
Middle / Low Speed Roughing End Mills With Tungsten Carbide Material SGS
|
...Roughing end mills 4mm to 20mm 4 Flute The name of product Solid Carbide End Mills & Tungsten Carbide HRC60 Roughing END MILL Type solid carbide R endmills,solid carbide flattened endmills solid carbide ball nose endmills, long neck end mill,Micro end mill , Model Number Various Helix angle 25-30 ° Place of Origin China (Mainland) Usage Milling......
INMIND TOOLS CO.LTD
|
Roughing End Mill / 3 Flutes Solid Carbide Cutter Roughing Milling Cutter In Stock
|
Roughing End Mill / 3 Flutes Solid Carbide Cutter Roughing Milling Cutter In Stock Description CNC rough milling of aluminum can be difficult, because the material can stick to the flutes and the chips can pack. Today's high performance carbide cutting tools for aluminum have large flutes to yield the maximum metal removal rates possible. These roughing end mills have 3 flutes, coarse and fine pitch, and high helix angles......
Changzhou Xinpeng Tools Manufacturing Co.,Ltd
|
1-20mm Carbide Roughing End Mills Segment Corner Radius Milling Cutter For Steel
|
... capacity, widely used in solt, profile, rough milling 2.Improves rigidity and surface finish effectively.Cutting edge over the center reduces the cutting resistance. High capacity of junk slot ......
Zhuzhou Sanyinghe International Trade Co.,Ltd
|
GREWIN HRC55 Copper coated 4F Tungsten Carbide Flat Roughing End Mill
|
...Roughing End Mill Micro grain raw material Grain size: 0.4-0.6μm Co 10%, 12% TRS >3600 N/mm2 Hardness HRA 91.8-92.5 Work piece HRC45-50 HRC55-60 HRC65 HRC68 Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9 mm; 1-20 mm Diameter of rods 4-20 mm Length 50-100 mm Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc Flutes No. 1-7 Introduction of the carbide materials of the End mill...
Zhuzhou Grewin Tungsten Carbide Tools Co., Ltd
|
Steel Cutting Carbide Roughing End Mills Cutter 0.4-1.0um WC Grain Size
|
... Tungsten carbide TRS >3600 N/mm2 HRA 91.8-92.4, HRC:45/55/60/65 Grain size 0.2-0.6μm Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9mm; 1-20mm Size Diameter 1.0mm-20mm standard and non-standard....
Benemetal Material Technology Co.,Ltd
|
Carbide roughing end mills for Aluminum
|
...roughing end mills for Aluminum 1. HRC55 Super Raw Material Wc:88% Co:12%,TRS>4000N/MM2,Grain Size:0.6um 2. Coating: TiAlN 3. Helix agnle:35 degree 4. Diameter:1-20mm 5.Work piece:Aluminum Specification Cutting Dia Flute Length Shank Dia A.0.L d l D L 6.0×15×6D×50L×3F 6 15 6 50 7.0×16×8D×60L×3F 7 16 8 60 8.0 ×20×8D×60L×3F 8 20 8 60 9 ×20×10D×75L×3F 9 20 10 75 10×25×10D×75L×3F 10 25 10 75 11×25×12D×75L×3F 11 25 12 75 12×30×12D×75L×3F 12 30...
Changzhou Cbaner Hardware Technology Ltd Co.
|
Submit your “30 helix angle roughing end mill” inquiry in a minute :