ASTM D3121 Peel Adhesion Test Equipment ISO Rolling Ball Tack Test
|
...Rolling Ball Tack Initial Adhesion Tester For Tape Usage Rolling Ball Tack Tester is applicable in primary adhesive test of tape. Roll the specified steel ball through chute. Measure the distance that the steel ball had rolled on the surface of plate which sticked by the adhesive tape. Primary Adhesive Tester. Product Description Design standard ASTM D3121, PSTC-6 , PSTC7, GB/4852 Angle 21°31′ Steel ball......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Tilt Angle 22° Adhesion Tape Rolling Ball Tack Tester
|
... on adhesive tape by rolling distance to determine the merits of tape tack. Machine operation procedures : Clean up chute and grounder on the tester by GB/T 4852-2002 specified ways,and after that you cannot touch them anymore. Fix test piece on hard and...
Perfect International Instruments Co., Ltd
|
PSTC 6 Rolling Ball Tack Tester Tape Initial Adhesion Testing Machine
|
...Rolling Ball Tack Tester Tape Initial Adhesion Testing Machine 1. Test principle PSTC 6 Rolling Ball Tack Tester adopted the inclined plane rolling ball method and the inclined groove rolling ball method of method B: Method A: the adhesion of the adhesive tape to the steel ball when A short contact occurs between the steel ball and the adhesive surface of the pressure-sensitive adhesive tape sample at A small pressure To test......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Simplified Rolling Ball Tack Tester Adhesive Testing Equipment
|
...Rolling Ball Tack Tester Adhesive Testing Equipment Use: It is designed and manufactured according to GB 4852, compatible with ASTM D 3121. It is applicable in tack tests of pressure sensitive adhesive tapes, adhesives, adhesive products.Turn the adhesive surface of specimen upward and place it onto the test plate (inclining 30°).Release freely the steel balls from large one to small one on the top. Record the number of steel ball...
Dongguan Liyi Environmental Technology Co., Ltd.
|
IEC68 120mm Adhesion Tape Rolling Ball Tack Tester
|
...Rolling Ball Method Initial Tack Ball Test Instrument Product use: Using the inclined ball method, when the short contact between the steel ball and the adhesive surface of the test specimen occurs with a slight pressure, the adhesion of the adhesive tape, label and other products to the steel ball is used to test the initial viscosity of the sample. National Standard: GB 4852, JIS Z0237 Operating Instructions Test...
Guangdong Aisry Instrument Technology Co., Ltd.
|
Adhesive Tape Peel Roller Test Machine For Initial Tack Test
|
..., protective film and other production industries to conduct the initial tack test of related products. Standard: This instrument is designed according to the standard GB4852. Test principle: Adopting the oblique rolling method. The initial adhesion of...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
300 Mesh Output Size Rolling Ball Mill For Lab Testing Suitable For Wet Grinding
|
300 Mesh Output Size Rolling Ball Mill for Lab Testing Suitable for Wet Grinding *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}img, picture, video, canvas......
Changsha Tianchuang Powder Technology Co., Ltd
|
High Stability Carton Box Compression Tester With Gapless Roll Ball Screw IF1552
|
High Stability Carton Box Compression Tester with Gapless Roll Ball Screw IF1552 *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}img, picture, video, canvas......
Infinity Machine International Inc.
|
ASTM D3121 Tack Adhesive Adhesion Testing Equipment - HTZ 013
|
...tack of pressure-sensitive adhesives by a rolling ball and is most appropriate for low-tack adhesives. Technical indexes 1. Adjustable angle: 0 - 90° 2. Plate width: 130mm 3. Width for test: 100mm 4. Ball size: 1/32in - 1in 5. Dimension: 372mm(L)×167mm(B)×90mm(H) 6. Net weight: 6kg Standard GB 4852, JIS Z0237, ASTM D3121 Features Inclined plate, rolling ball......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Celtron Load Cell Bend Tear Electronic Tensile Tester High Precise Ball Screw
|
...testing Bend Tear Electronic Tensile Tester High Precise Ball Screw Product Description Celtron load cell testing Bend Tear Electronic Tensile Tester High Precise Ball Screw is designed for quick and reliable tensile, compression, bending, shear, peel, loop tack......
Hai Da Labtester
|