4000cm3 0.55MPa IEC Test Equipment Ageing In Air Oxygen Bomb
|
...General application — Thermal ageing methods’ clause 8.2 and 8.3 ; IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 22.32; Application: It is suitable for the aging test in the oxygen and...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
4000CM3 Environmental Testing Equipment Oxygen Bomb Calorimeter Stainless Steel Housing
|
... polymer materials under the pressure and temperature, oxygen and compressed air in the medium for aging test. Meet GB / T2951.2-1997 standard requirements. Temperature control: room temperature -150 ℃ 4) Volume: 4000CM3 5) Heater power: 2400W 6) The...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
manual IEC Test Equipment IEC 60811 Cold Bend Test Apparatus For Cables Sheaths And Insulation
|
... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to...
Guangzhou HongCe Equipment Co., Ltd.
|
UL746A CTI IEC Test Equipment Tracking Index Flammability Test Chamber
|
|
... of PLC Control Product information: KingPo has designed a series of PLC control with 7 inch touch screen display system test equipment, they are more humanized than the old version ones, and the new version PLC ones have won high reputation from the...
Dongguan Kingpo Technology Limited
|
IEC61058 Load Box IEC Test Equipment
|
...equipment testing IEC test equipment Product overview: This load box is designed and manufactured according to IEC60884, IEC61058, IEC606691 standards and etc. It is used for the on-off ability test and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test......
Guangzhou Shice Equipment Co., Ltd.
|
Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment
|
Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing –Part 2-75: Tests – Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. Feature: The construction consists of a moving hammer head......
KingPo Technology Development Limited
|
Test Finger Probe,precision iec test equipment,jointed iec test finger probe
|
... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....
ALLIED TESTING (HK) CO.,LTD.
|
IP1X / IP2X Iec Test Equipment , Test Sphere Diameter 50 Mm With Handle
|
Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is ......
Pego Electronics (Yi Chun) Company Limited
|
Rubber Testing Equipments For Oxygen Bomb Aging Testing IEC 60811 4000CM3
|
IEC 60811 Oxygen Bomb Aging Chamber Testing Machine for Plastic and Rubber Products Meet the standards: In line with GB/T2951.2-1997, JB/T4278.9 test standards. Technical Parameters: Maximum working pressure: 2.5Mpa Temperature automatic control range: room temperature ~200°C Safe burst pressure: 2.7~3Mpa Volume: 4000CM3......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 60227-1 Tinsel Cord Bending Snatch Test Equipment EV Connector Testing Equipment
|
...Test Equipment Complied Standards & Clauses IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. Equipment Overview The Tinsel Cord Bending and Snatch Test Equipment is designed and manufactured according to the standard requirement of IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. It is used to test......
Sinuo Testing Equipment Co. , Limited
|
