240CH LED Driver Burn In Chamber with 0.05-10A/CH Load Current and 400W/CH Power for LED Power Aging
|
Computer Monitoring Aging Test Equipment Of LED Switching Power Supply Performance parameters Model CP-300304 CP-300404 CP-300504 CP-300104 Power of single channel 400W/CH 100W/CH 125W/CH 96W/CH Quantity of load channels 240CH 192CH 192CH 96CH Scope of ......
Shenzhen CPET Electronics Co., Ltd.
|
Fire Flame Plastic Burning Test Chamber UL 94 Standard AC 220V 50Hz 35～98%RH
|
... of Plastic Material Specified for Manufacturing Equipment and Parts, GB/T2408-1996 Testing Method of Burning of Plastic Material: horizontal and vertical as well as the relevant clauses in IEC60065 for a purpose of testing the burning characteristics of...
Infinity Machine International Inc.
|
IEC 60335-1 Clause 30 Cellular Plastic Materials Horizontal Burning Test Chamber
|
...Burning Test Chamber Product information: This test chamber is designed and manufactured according to the standard and related requirement of ISO9772-2001, UL94, it is required by IEC 60335-1 clause 30. This international standard specifies a small-scale laboratory screening procedure for comparing the relative burning......
Sinuo Testing Equipment Co. , Limited
|
High Temperature Aging Test Chamber ISO，Burn In Chamber For Air Conditioning System
|
...to 38% energy. The chamber can be used for online testing of new energy vehicle cabin and air conditioning system.It can be used for high temperature test,low temperature ......
Shenzhen Douwin Technology Co., Ltd.
|
Steel Construction Conveyor Belt Vertical Burning Test Chamber for ISO 340 and AS1334.10 Compliance
|
...Burning Test Chamber Running Belt Vertical & Horizontal Fire Test Machine Product Specifications Attribute Value Materials Steel Standards ISO340 Bunsen burner The inner diameter is 10.5mm Bunsen burner rotation angle 0°～45° adjustable Thermocouple Type k armor Thermocouple display range 0～1300℃ Product Description Conveyor Belt Vertical Burning Test Chamber......
SKYLINE INSTRUMENTS CO.,LTD
|
Horizontal / Vertical Burning Test Chamber Spray Tank , 180×560mm Specimen Holder
|
Horizontal And Vertical Burning Test Chamber Flammability Testing Equipment Principle: A defined ignitions flame from a specified burner is applied for a defined period of time to textile specimens which are ......
Guangzhou HongCe Equipment Co., Ltd.
|
Electronic Glow Wire Flammability Test Apparatus Horizontal Burning Tester Chamber
|
Glow Wire Flame Test Chamber With Manual Control Product Description This testing machine is mainly used to simulate the thermal stress caused by heat sources or ignition sources such as hot components or overloaded resistors in a short time under fault......
Guangdong Guangce Instrument Technology Co., Ltd
|
Battery Burning Test Chamber Flammability Tester For Lithium Ion Batteries / New Energy Batteries Fire Test Equipment
|
... on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the...
Dongguan Haida Equipment Co.,LTD
|
Battery Burning Test Chamber Flammability Tester For Lithium Ion Batteries / New Energy Batteries Fire Test Equipment
|
|
... on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the...
Hai Da Labtester
|
UN ECE R118 (Rev. 2) Annex 6 / ISO6941 Vertical Burning Test Chamber
|
Principle This test consists of exposing samples, held in a vertical position, to a flame and determining the speed of propagation of the flame over the material to be tested. Scope and field of application: This international standard specifies a method......
KingPo Technology Development Limited
|