Length 2 / 3 / 4m Corrosion Resistance SSTR38/500 Grouting Anchor Rods
|
Self Drilling High Corrosion Resistance Stainless Steel Grouting Anchor Rods SSTR38/500 Features SupAnchor stainless steel anchor rod benefits from superior strength, whilst retaining the elevated ductility associated with stainless steel. In general it ......
Supanchor Rock Reinforcement Co., Ltd.
|
High Strength Seamless Steel Pipes 40mm Large Bearing Hollow Grouting Anchor Rod
|
High Strength and Large Bearing Capacity Skz Series Hollow Grouting Anchor Rod for Coal Mine Product Description: Product Name Hollow bolts / Rock bolts / Hollow grouting anchor rod / grouted hollow anchor bar Standards GB1499.2-2007 GB 50086-2015 TB/T ......
SHANDONG TONGMAO SPECIAL STEEL CO., LTD
|
Screw Cement Slurry Grouting Pump 1500-8000L/H 3kw 11kw For Anchor Rod Grouting
|
...Grouting Pump Application of screw grouting pump: The cement mortar grouting pump can smoothly pump and pressure inject cement slurry, cement mortar, thick slurry, etc. with a water cement ratio of 0.3 or above. It is widely used for anchor rod grouting, anchor cable grouting, consolidation grouting, backfill grouting, lining grouting, void layer pressure grouting, ground source heat pump grouting......
Hengshui Aoxing Geological Equipment Co., Ltd
|
Hydraulic Variable Speed Jet Grouting Drilling Rig for Anchor Rod and Drilling Construction in Kyrgyzstan
|
...Jet Grouting Drilling Rig for Anchor Rod and Drilling Construction in Kyrgyzstan Feature of Hydraulic Variable Speed Jet Grouting Drilling Rig for Anchor Rod and Drilling Construction in Kyrgyzstan: 1. The Convenient, Safe, and Yellow Jet Grouting Drilling......
Shannxi Xitan Geological Equipement Co.,Ltd
|
25mm-130mm Diameter Self Drilling Anchor Bolt Hollow Anchor Bar Anchor Rods for Mining
|
... drill bit that can perform drilling, anchoring and grouting in a single operation. The hollow bar allows air and water to freely pass through the bar during drilling to remove debris and then allow grout to be injected immediately after drilling is...
HEBEI MINETECH MACHINERY TECHNOLOGY CO., LTD
|
25mm - 130mm Diameter Self Drilling Anchor Bolt Hollow Anchor Rods High Strength For Mining
|
..., it consists of rod, drill bit,coupling, plate, grouting stopper and nut. It has been widely used in tunnling, mining,slope stabilization, tunneldiseasestreatment and roof supporting of undergroundworks. It is for loose ground(clay, sand ......
KSQ Technologies (Beijing) Co. Ltd
|
R25 R32 R38 R51 T76 Threaded Rod Concrete Anchors Headed Anchor Rod with ISO10208 ISO1720 Certification
|
...is equipped with slurry holes and dust removal. Application scope: 1. Radial reinforcement: Hollow anchors replace traditional mortar anchors for radial reinforcement, which can completely solve many defects such as incomplete grouting and inability to...
Shandong Zhengde Metal Manufacturing Co., Ltd
|
Multi Functional Anchor Rod Carrier Jumbo Tunnel
|
...adopts full hydraulic drive. It can be equipped with interchangeable anchoring power heads and coring power heads to achieve advanced detection holes, horizontal coring operations, grouting in pipe sheds, slope anchoring, etc. The machine uses an engine to...
Sichuan Zuanshen Intelligent Machinery Manufacturing Co., Ltd.
|
Tunnelling Freezing Borehole Drilling And Jet Grouting Anchor Drilling Rig TMZ - 1250
|
...Grouting Anchor Drilling Rig TMZ - 1250 TMZ-1250 hydraulic anchor drilling rig is designed specially been used for anchor borehole drilling in small tunnels or some none-spacious places. With compact structure and articulation system combined with rotating tables it can be used for multi-position with multi-angle anchor borehole drilling. TMZ - 1250 Anchor Drilling Rig is designed been used for anchor...
QUATEC GEO-ENGINEERING MACHINERY CO., LTD.
|
High Tensile Strength 20mnsi Mining Industry Self Drilling Hollow Grouting Rock Bolt Cold/Hot Rolled Cold-Drawn Anchor Rod for Machinery Chemical Industry
|
...anchor consists of five parts: hollow drill pipe, plastic drill bit, grout stopper, backing plate, and nut. The drill bit is made of engineering plastic and is equipped with slurry holes and dust removal. Application scope: 1. Radial reinforcement: Hollow anchors replace traditional mortar anchors......
SHANDONG ZHENGDEMETAL MANUFACTURING CO.,LTD.
|
Submit your “4m grouting anchor rods” inquiry in a minute :