Addressable Input/Output Module , Fire Alarm Addressable Control Module
|
...on-site fire linkage equipment (such as alarm bell, smoke exhaust valve, air supply valve, fire shutter door, fire pump, fan, etc.). powered by external 24VDC,The signal of fire linkage device can be fed back to the fire alarm controller. The module can be...
Shenzhen Xinhe'an Technology Co., Ltd.
|
50mA Wireless Fire Alarm Input Output Module In Fire Alarm System
|
.... When there is a fire alarm, after the module receives the input signal specified by the manufacturer, it will send an alarm signal to the control panel through wireless communication technology, and the red light will always be on. Features: 1....
Zhengzhou Tuohai Technology Co., Ltd.
|
ATL-952 Intelligent input module
|
... heat detector, a conventional manual call point, a conventional hooter/horn and some other equipment. After the said equipment starts to operate, the alarm signal output will be sent by the ATL-952 module to the fire alarm control panel through a...
Angel technologies Hongkong Ltd.
|
Addressable fire alarm systems 2 wire bus input module
|
..., Non-condensing Operating Temperature Range: -10°C to50°C Dimension: 120 mm L x 80mm W x 43mm H Weight: 175 g Addressable fire alarm system architecture:...
Shenzhen KINGUI Limited
|
Addressable fire alarm systems 2 wire bus input module
|
|
Addressable fire alarm systems DC24V 2 wire input module Specification: Connection: non-polarity two wire Standby current: <0.5mA (bus); <6mA (power line) Working current: <2mA (......
Jingo International CO., LTD
|
Built - In FM200 Fire Alarm System Module
|
... and avoid mistakes. Connect conventional detector, manual call point or fire hydrant button, and deliver the alarm signal to the controller. Gas fire extinguishing system and fire alarm equipment linkage debugging has been completed, when a fire occurs in...
Guangdong Dingya Fire Equipment Co.,Ltd
|
FP300 Addressable Fire Alarm Panel
|
...Fire Alarm System Control Panel Addressable Fire Alarm System FP300 Addressable Fire Alarm Control Panel OVERVIEW The purpose of the FP300 Fire Alarm Control Panel (FACP) is to monitor input signals, give indications and possibly activate outputs as programmed. It is designed to comply with EN 54-2 with qualities of simple installation, operation and easy maintenance. The FP300 panel is an addressable fire...
Beijing HiYi Technology Co., Ltd
|
1746-NR4 B FRN 5 SLC 500 Allen Bradley Analog Input Module RTD Resistance
|
...Input Module RTD Resistance Quick Detials ALLEN BRADLEY 1746-NR4 1746NR4 INPUT MODULE 4 POINT ANALOG RTD/RESISTANCE SLC500 CURRENT LOAD: 50MA @ 5V 50MA @ 24V; BANDWIDTH: 2.62-65.5HZ one year warranty SPECIFICATIONS The 1746-NR4 is a SLC 500 RTD/Resistance Analog Input Module. This RTD/Resistance Analog Input Module has 4 Inputs......
Shenzhen Viyork Technology Co., LTD
|
Automatic Fire Protection Systems Fire Alarm Signal Automatic
|
... the output control module starts the alarm, it is ringing alarm signal to inform the proximate persons of the need to take action, usually to evacuate. Working principle : When a fire occurs, smoke in the air contained in the particle concentration and...
Guangzhou Xingjin Fire Equipment Co.,Ltd.
|
Fire Alarm Input Device /Conventional Manual Call Point for Fire Alarm System
|
Model:JS-FAS07 Fire Alarm Input Device /Conventional Manual Call Point for Fire Alarm System 1. Rated voltage: 12/24VDC/220VAC Optional 2. Consumption: 10W 3. SPL(dB/1m): 103 4. Dimension: 87mmL*87mmW*51mmH...
JSUS ELECTRONIC TECHNOLOGY CO.,LIMITED
|
Submit your “50ma input module fire alarm” inquiry in a minute :