5KN 10KN Electronic Universal Testing Machine For Metal Bending Test
|
... tensile test Metal/Plastic bending test Wire / sheet tensile / compression/tearing/bending test Scope: Tape, Automotive, ceramic, composite material, construction, medical/food equipment, metal, paper, plastic, rubber, textile, wood, communication, etc...
Infinity Machine International Inc.
|
5KN Power Cord Tester Vertical Single Column Digital Tensile Strength Test Machine
|
... tape, rubber, resin, plastic, metal rod, metal pipe, metal sheet and metal profile, and composite material. It is also suitable for the tensile test of finished products when matched with fixtures., Compression, peeling, shearing, bending (folding),...
Chenxin Automation Equipment(Guangzhou) Co., Ltd.
|
Gantry Type Tensile Test Equipment 5kN Compression Bending Test
|
... materials such as rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics, metal wires, metal foils, metal plates and metal rods. It can also be used with special fixtures. It is suitable for tensile, compression, peeling,...
Sinuo Testing Equipment Co. , Limited
|
Panasonic Servo Motor Tensile Strength Tester Metal Bending Test Single Column
|
..., plastics, textiles, wire and cable, composite materials, leather, waterproof membrane, non-woven, geotextile fabric, paper and other non-metallic materials and metal wire, metal foil, sheet metal and metal rods timber and other...
Hai Da Labtester
|
600KN Hydraulic Torsional Testing Machine , Metal Bending Tensile Compression Tester
|
... Bending Tester 600KN Hydraulic Universal Testing Machine Purpose: Tensile Compressive Bending Tester is the use of fuel tank mounted under the host and mainly used for tensile, compression, bending and shear tests of metal or non-metallic materials......
Perfect International Instruments Co., Ltd
|
ASTM D522 BS3900 E11 ISO6860 Tapered Shaft Bend Testing Machine Conical Shaft Bending Tester
|
...Bend Testing Machine Conical Shaft Bending Tester Instroduction The conical shaft bending tester. The changing conical diameter of the instrument enables the dry coating film of the metal sheet material to be stretched under different diameters. The length of the conical shaft is 200mm, the major end diameter is 37mm, and the minor end diameter is 3mm. When testing the sample, the coated metal......
DONGGUAN LONROY EQUIPMENT CO LTD
|
360 Degress Cable Bending Tester Sheet Metal Case With Various Colors
|
360-degress, Wire/Cable Bending Tester (MY-XC-360), Sheet metal material with white color Technical Specification 1. Test standard: clip, flat angle 2. Test station: 6 3. Test speed: 5-60 ......
Shenzhen Mingyu Instrument And Equipment Co., Ltd.
|
IEC 60884-1 Bending Test Apparatus bend tester without screw thread
|
...Bending Test Apparatus bend tester without screw thread Production introduction: According to the provisions of IEC 60884-1, GB2099.0-1996,12.3.12 provisions of the non threaded terminal bending testing machine. The test machine without screw thread is mainly used for the bending......
Guangzhou HongCe Equipment Co., Ltd.
|
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
|
... tests shall be tested as follows: Pins of assembled plugs shall be tested by clamping the plug in a rigid holding block and applying a bending force, as shown in Figure 2.8, to the pin under test. The pins shall be...
KingPo Technology Development Limited
|
Accurate Sheet Metal Bending Processes with Brake Techniques
|
..., and the ability to utilize modern sheet metal bending actuators. Material steel, stainless steel, aluminum,iron, carbon steel,copper, brass, alloy, etc. Thickness 0.1mm to 12mm, as your ......
Shenzhen Hongsinn Precision Co., Ltd.
|