Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Single Station Load 4N
|
...Plug Pins Abrasion Test Apparatus Single Station Load 4N Standard of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 Application of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins Feature Insulation Sleeves Of Plug Pins Abrasion Test Apparatus......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
BS1363 Fig8 Plug Pin Deflection Test Apparatus For Resilient Plug
|
... Apparatus For Mechanical Strength Test On Resilient Covers SC-B3F5 BS1363-1-Fig 5 Gauge for plug pins SC-B3F7 BS1363-1-Fig 7 Mounting plate SC-B3F8 BS1363-1-Fig 8 Plug pin deflection test apparatus for resilient plugs SC-B3F9 BS1363-1-Fig 9 Apparatus for...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60884 Testing Equipment Insulating Sleeves Of Plug Pins Abrasion Test Apparatus with 9mm Stroke
|
...Testing Equipment Insulating Sleeves Of Plug Pins Abrasion Test Apparatus with 9mm Stroke Standard of Apparatus for abrasion test on insulating sleeves of plug pins: IEC 60884-1: 2022 Plugs and socket-outlets for household and similar purposes -Part 1: General requirements clause 24.8 and figure 31; The Apparatus for abrasion test on insulating sleeves of plug......
Guangzhou HongCe Equipment Co., Ltd.
|
Insulation Sleeves of Plug Pins Abrasion Test Apparatus IN-1
|
... to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of ......
shanghai kerang technology co ltd
|
BS 1363-1 Figure 8 Plug Pin Deflection Test Apparatus For Resilient Plugs Weight 4.2~4.4N
|
... Parameters: From the engagement surface of the plug and parallel 24.5~25mm Test direction four directions according figure 8 The distance between the pointer tip and the mating surface of the plug 125mm approx. Weight 4.2~4.4N Delineation from the...
Sinuo Testing Equipment Co. , Limited
|
BS1363-1:1995 Figure 8 | Plug Pin Deflection Test Apparatus For Resilient Adaptors
|
BS1363-1:1995 Figure 8 | Plug Pin Deflection Test Apparatus For Resilient Adaptors...
KingPo Technology Development Limited
|
Plug Pins Fixation Verifying Test Apparatus For Torque And Pull Force Tests On Plug Pins
|
... IEC60065 clause 15.4.3 (b and c) , it can perform both torque test and pull force test to verify the firmness of plug pins. The test apparatus should work with a heating cabinet when perform the pull force test. 2. Parameters Number of test station 1...
Pego Electronics (Yi Chun) Company Limited
|
Factory Sell! Apparatus for torsion test on pins of BS1363 figure 33
|
...Apparatus for torsion test on pins of BS1363 figure 33 SHENZHEN BONAD PRECISION INSTRUMENT COMPANY LIMITED is a high-tech company in Shenzhen, producing all kinds of precise instrument. Our main line covers Accessibility Probes, Test Chamber, Weight Sensor, Load Cell, Electrical Ruler, Glow Wire Tester, Spring Impact Hammer, Electrical Safety Tester Series, Environment Tester, Universal Testing......
HongKong Bonad Technology Limited
|
IEC62196 Electric Vehicle Screwed Glands Torque Test Apparatus
|
... gland tester conforms to IEC 62196-1Ed.4CDV 2020 clause 26.5, table15. Based on the above table, the torque range is 5N.m to 12.5N.m. As per client’s requirements, the...
Sinuo Testing Equipment Co. , Limited
|
IEC60598-1 Luminaries Test Equipment Direct Plug In Test Apparatus
|
... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is...
SKYLINE INSTRUMENTS CO.,LTD
|