Four Mil Pcb Printed Circuit Board Finished Thickness 1.0MM Half Hole
|
...Hole Printed Circuit Board , Finished Thickness 1.0MM 4 Layer Rigid Printed Circuit Board Half Hole PCB Specifications: Layer Count: 4Layer Half Plated Hole PCB Board Thickness: 1.0MM Material: FR4 KB6160 Copper Thickness: 1/1/1/1OZ Min Hole: 0.2MM Min Line: 4/4 Mil Hole: L1-L4 Impedance Control: 90 ohm +/-20% Solder Mask: Black Unit Size: 100mm*60mm/21up Surface Treatment: ENIG Special Treatment: Half Plated Holes......
Witgain Technology Ltd
|
Customized 1.0mm Quick Turn PCB Boards Fabrication Immersion Gold 2U
|
...0mm Quick Turn PCB Boards Fabrication Immersion Gold 2U PCB Manufacturer Customized Black PCB Fabrication Circuit Boards Min. hole size: 0.15mm(need to review the board if smaller than 0.15 mm ) HDI Min drill hole capability: 0.08-0.10MM PCB track/gap capability: 3mil(0.075mm) PCB outline method: Routing/V-CUT/Punching Solder mask thickness capability: standard 15-20um; Advanced: 35um Min solder......
Huashengxin Circuit Limited
|
1L To 28L Through Hole Soldering PCB Industrial Circuit Board Assembly
|
...hole soldering industrial circuit board circuit board assembly PCB Layers 1-28 layers Max PCB Board Size 457*610mm Min PCB Board thickness 4 layers, 0.4mm/16 mil 6 layers, 0.8mm/32 mil 8 layers, 1.0mm/40 mil 10 layers, 1.2mm/48 mil Min PCB Line Width 0.1mm Min PCB Line Space 0.1mm Min PCB Hole Size 0.2mm PTH Wall Board......
Guangzhou Highleap Electronic Co.,Ltd.
|
0.5mm Pitch Height 3.0mm Board To Board Connector 60 Pins
|
...0mm Board To Board Connector 60 Pins BOARD TO BOARD CONNECTION TYPES: Board to Board Permanent Stamped Pin Machined Pin Straight Right Angle Movable Stamped Pin Female Male Machine Pin Straight Through Hole Female Male Right Angle Through Hole Female Male PERMANENT CONNECTION: • Permanent connection between two boards can be readily achieved by soldering a through-hole header to both the main (mother) board......
Dalee Electronic Co., Ltd.
|
Electronic High Density Interconnect Pcb Blind Hole / Buried Hole
|
...hole/buried hole Electronic HDI PCB with Design Service 1. Product Descprition Item Specification Material High TG FR4 Layers 4-20 layers HDI HDI plus 1 or 2 Copper thickness 1/3-12OZ Minimum Via 0.1mm Surface treatment ENIG,OSP Board thickness 0.15-4.5mm Solder mask color Gree,Blue,Black,Red,White Tolerance of board thickness T>=1.0mm, Tol: +/-10% T<1.0mm......
Shenzhen Fany Technology Co.,Ltd
|
High CTI 600V PCB Built on 2.0mm FR-4 With HASL and Countersunk Holes
|
...Introduction This is a type of single sided circuit board built on FR-4 substrate with CTI 600V. It is a 2.0mm thick PCB with simple tracks, green solder mask and white silkscreen. The surface finish on pads is hot air leveling, lead free type. There are 3...
Shenzhen Bicheng Electronics Technology Co., Ltd
|
0.6 MM PCB Board Assembly 4 Layer Half Hole Immersion Gold
|
... Space&Width: 3/3 mil 6 Application Area: Blue-tooth Module Our Capabilities: NO Item Capability 1 Layer Count 1-24 Layers 2 Board Thickness 0.1mm-6.0mm 3 Finished Board Max Size 700mm*800mm 4 Finished Board Thickness Tolerance +/-10% +/-0...
Witgain Technology Limited
|
4 Oz Copper TG130 FR4 PCB Board Production
|
...board Essential details Model Number: pcb Place of Origin: Guangdong, China Base Material: FR4 Copper Thickness: 1-3oz Board Thickness: 0.8-2.0mm Min. Hole Size: 0.01 Min. Line Width: 0.015 Min. Line Spacing: 0.2 Surface Finishing: HASL/ENIG, HASLOSPimmersion Gold Material: FR4 TG130 - FR4 TG180 Color: Red Blue Green Black White Layer: 1-40 Layers Solder......
ShenZhen Jieteng Circuit Co., Ltd.
|
Through Hole PCB Printed Circuit Board Assembly 0.4 -4.0mm Board Thickness
|
pcb board assembly through hole PCB Assembly quick turn pcb assembly Precise and Cost-effective Through Hole Assembly Services Conventional leaded components soldered through the PCB have been the mainstay of the electronics industry for many years, ......
Shenzhen Shinelink Technology Ltd
|
6.0mm Thickness HASL Lf Flex PCB Board High Tg Electronics FPCB Immersion Gold
|
...0mm Thickness HASL Lf Flex PCB Board High Tg Electronics FPCB Immersion Gold Capacity: PCB CAPABILITY Layout number 1-20 layers Material FR4,Tg=135,150,170,180,Rogers, Ceramic and Aluminum based copper thickness 1/2oz,1oz,2oz,3oz,4oz,5oz Board thickness 8-236mil(0.2-6.0mm) Min.line width/space 3/3 mil(75/75um) Tolerance of hole size 2 mil(o.05mm) solder......
Abis Circuits Co., Ltd.
|