MPO-12FC OS2 Single-Mode Fiber Optic Fanout Patch Cable – 12-Core MPO to FC Breakout Harness
|
...Fiber Optic Fanout Patch Cable – 8-Core MPO to FC Breakout Product Overview The MPO-12FC OS2 fanout patch cable is a single-mode, low-attenuation fiber distribution solution designed for long-distance and high-precision optical applications. Using OS2 9/125 μm single-mode fiber, this harness breaks out a 12-fiber......
ShenZhen Ruiara Co., Ltd
|
Layer 3 Managed Fiber Optic Switch 48 Port 10G SFP 4 Port 40G QSFP Support WEB
|
Fiber Optic Switch Layer 3 Managed 48-Port 10G SFP 4-Port 40G QSFP Fiber Switch Product Overview: The LNK-FS4804HC-SI is a high-performance Layer 3 Managed 48-Port 10G SFP+ and 4-Port 40G QSFP+ Fiber Switch, designed for next-generation data centers and enterprise core networks. With a non-blocking switching architecture and 650Gbps backplane capacity, it delivers industry-leading performance in a 1U Top-of-Rack (ToR) form factor. The switch...
E-link China Technology Co.,LTD
|
L3 Managed Fiber Optic Switch 24x10G SFP 2x40G QSFP Ports IGMP Snooping Frame
|
...Fiber Optic Switch Model: LNK-FS2402HC Overview LNK-FS2402 Series is a 10 Gigabit data center switch. Providing 650Gbps switching capacity, the highest performance (1U TOR) in the industry. With 483.6Mpps forwarding performance, L2/ L3 full wire-speed forwarding. With the modular design, it provides24*10G SFP+ optical......
E-link China Technology Co., Ltd.
|
FC APC Pigtailed Latched 1x8T 1550nm Fiber Optical Switches
|
...Fiber optic Switches 1x8 Opto-Mechanical Optical Switch with small size 1310&1550nm GEZHI ’ 8x1 Fiber Optic Switch (1×8 Mechanical Optical Switches) support 1310&1550nm. The Optical Switch is a 8x1 prism optical switch. It can support 8 optical fibers input and 1 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching......
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
1x2 Mechanical OSW Fiber Optic Switch For System Monitoring
|
...Fiber Optic Switch Introduction Olycom's 1x2 Mechanical Fiber Opitc switch is used to turn on and turn off optical signal. The 1x2 Mechanical Fiber Optic Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical......
Shenzhen Olycom Technology Co., Ltd.
|
120km Transmission Network Fiber Optic Switch With -40°C To +85°C Operating Temperature
|
...Fiber Optic Switch is an advanced optical network switch that provides reliable and stable transmission of high data rate signals over optical fiber. It is designed to meet the stringent requirements of next-generation fiber-optic networks. With a maximum data rate of 10/100/1000/10000 Mbps, the Fiber Optic Switch......
Shenzhen Optfocus Technology Co., Ltd.
|
SW High Isolation Fiber Optic Switch 2x2 High Reliability
|
... Remote monitoring in optical network Testing of fiber optical component agnet Fiber Optical Switch is connected to the optical path by connecting or blocking the optical signal, the switch has nonmechanical configurations and activated via an...
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
1x1 1x2 2x2B Mechanical Fiber Optical Switch Non Latching 5V 3V FC APC
|
...Fiber Optical Switch 5V/3V FC/APC 1x2T optical switch (OSW) features low insertion loss, low driving power, small size, and high switching speed. The switch is designed for use in optical fiber communication networks and measurement instruments. The switch consists of two ports that selectively transmits redirects, or blocks optical power in a fiber optic transmission line. The optical switch......
Shenzhen Unifiber Technology Co.,Ltd
|
IEEE802.3 1000M 8 Port SFP Fiber Optic Switch , Port Trunking Switch
|
...Fiber Optic Switches , Port Trunking Switch 9 ports Gigabit Ethernet Optical Fiber Switch has eight 1000M SFP sockets and one 10/100/1000M UTP ports. Customer can choose different 1000M SFP module according as his demand, such as Multimode or Singlemode, Single fiber or Dual fiber......
Fiberroad Technology Co., Limited
|
Mechanical Fiber Optical Switch 1×2 for FTTH FTTB FTTX Network
|
...Optical Switch Description Name: Mechanical Fiber Optical Switch 1×2 Model Number: 1*2-D-5L-SM-025-15-00 Operating Temperature: -5~70ºC Operating Voltage: 3.0 V Or 5.0V Keyword: Fiber Optical Switch Dimension: L27×W12×H8.2 (±0.2) Warranty: 1Year Certification: CE RoHS FCC Features Compact Size Fast Switching......
Beijing Spacecom Co., Ltd.
|
Submit your “650gbps fiber optic switch” inquiry in a minute :