IEC 62196-1 Electric Vehicle Terminal Test Equipment For Mechanical Tests On Terminals
|
...-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is...
Sinuo Testing Equipment Co. , Limited
|
Fig12 Terminal EV Connector Testing Equipment Clamping Screw IEC 62196
|
... Parameters Parameter Name Parameter Data Power Supply According to customer requirements Test Station Single Test Rate (10 ± 2) r/min Diameter of Gyration 75mm Test Times 1-999999times Load Weight 0.4-70.3Kg Test Height 260-660mm adjustable Diameter of...
Sinuo Testing Equipment Co. , Limited
|
75mm IEC Test Equipment , Wire Clamping Damage To And Accidental Loosening Of Conductors 10 ± 2 RPM Flexion Tester
|
... of wire which confirms to standards IEC60947-1 clause 8.2.4.3 ,figure 1 table 5. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire....
Guangzhou HongCe Equipment Co., Ltd.
|
75mm LCD Suitcase 1/4HP Electric Zipper Pull Tester Luggage Testing Equipment
|
... stress with given times. Zipper Pull Tester applies to test the zipper under the transverse-oriented and long direction stress, test whether the zipper can bear the pulling with given times .During the test, the zipper head will be brought along with the...
Dongguan Hust Tony Instruments Co.,Ltd.
|
6 Groups Cable Testing Equipment For Plug Static Pull Test UL / IEC Standard
|
...Testing Equipment For Plug Static Pull Test For UL And IEC Standard 1. Quick Details: Alternative name Plug-line static tensile testing machine Function testing load strength between the plug terminal and power cord Feature Electric drive Weight 310kg Volume 91×55×99cm Test standard UL-817,IEC, GB 2. Product Summary: Plug-line static tensile testing machine is used for testing load strength between the plug terminal......
KingPo Technology Development Limited
|
AC220V Screwless Terminals Thermal Stress Tester Plug Socket Test Equipment
|
...’ clause 12.3.11 Application: Screwless terminals shall withstand the electrical and thermal stresses occurring in normal use. This device is use to check whether the screwless terminals can withstand the electrical and thermal stresses occurring in...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
6 Groups Cable Testing Equipment For Plug Static Pull Test , UL / IEC Standard
|
...Testing Equipment For Plug Static Pull Test For UL And IEC Standard 1.Quick Details: Alternative name Plug-line static tensile testing machine Function testing load strength between the plug terminal and power cord Feature Electric drive Weight 310kg Volume 91×55×99cm Test standard UL-817,IEC, GB 2.Product Summary: Plug-line static tensile testing machine is used for testing load strength between the plug terminal......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
500N Destop Type Packaging Testing Equipments For Tensile Strength Testing
|
...Testing Equipments , Tensile Strength Machine (RS-8008) Typical applications: Electrical terminal tensile test Small plastic shell of electrical parts press resistance test Drink package bursting test The electrical terminal tensile test is used to test the firmness and reliability of the terminal connection to ensure its safety in actual use. The small plastic shell voltage test......
Infinity Machine International Inc.
|
Stable Non Destructive Testing Equipment / ADL Terminal Pulling Force Tester
|
...Terminal Pulling Force Tester Brief Introduction: ADL Terminal pulling force tester is a kind of testing equipment to wiring harness and electronic industry, specifically used to test all kinds of wire terminals pulling-out force. The instrument can combine NK, HF force gauge and special fixture in testing. This instrument has characteristics of compact device,accurately controlling, high testing......
DongGuan Q1-Test Equipment Co., Ltd.
|
Displacement Transducers Soil Testing Equipment Laboratory Testing Equipment
|
...Testing Equipment Description: It is a high precision linear position transducer with a long lasting conductive track.Especially for the places where the direction of length is limited and self-align is difficult. It is widely used in injection mould, rubber machinery, wood-working machinery and hydraulic machinery. Soil Testing Equipment Features: Stroke lengths available from 75mm......
Hebei Better United Import And Export Co., Ltd.
|
Submit your “75mm gyration terminal testing equipment” inquiry in a minute :