SUS304 IEC60884-1 80N Flexible Cable Test Apparatus 220V/50Hz
|
...Flexible Cable Retention Force Test Apparatus 220V/50Hz 1. Introduction This device is manufactured according to the IEC60884-1 clause 23.2 figure 20. It is used to check the effectiveness of the retention of the cable by the cord anchorage. It’s applied to the removable plug, removable mobile socket, non-rewirable plug, rewirable mobile socket. The according tensile force of the flexible cable: The rated current of the flexible cable...
Pego Electronics (Yi Chun) Company Limited
|
Flexible Cable Testing Equipment , Flexing Test Apparatus 2- 40A Adjustable
|
....2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The...
KingPo Technology Development Limited
|
Test Stroke 1000m Flexible Cable Testing Equipment 0-400V Voltage Loading
|
...consists of a carrier C, a driving system for the carrier and four pulleys for each Sample of cable to be tested. The carrier C supports two pulleys A and B, which are of the same diameter. The two fixed pulleys, at either end of the apparatus, may be of a...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60227-5 Flexing Test Apparatus For PVC Insulated Flexible Cables Testing PLC Control
|
...Test Apparatus For PVC Insulated Flexible Cables Testing PLC Control Product information: The flexing test apparatus is designed and manufactured according to standard SANS /IEC 60227-5 SANS/IEC 60227-2 PAGE 4 of 18 SANS 1574-2 SANS 1574-3 SANS 1574-4 SANS 1574-5 SANS/IEC 5515 etc. It complies with the relevant standard requirements of rubber plastic wires’ and cables’ mechanical strength flexing test......
Sinuo Testing Equipment Co. , Limited
|
Static Flexibility Cable Testing Machine For Completed Flexible Cables
|
...Flexibility Tester HDX1303 Feature:A sample with a length of 3m±0.05m shall be tested in an apparatus similar to that shown in figure 2. Two clamps, A and B, shall be located at a height of at least 1.5m above ground level. Clamp A shall be fixed and clamp B shall move horizontally at the level of clamp A. The ends of the sample shall clamped vertically (and remain vertical during the test......
shanghai kerang technology co ltd
|
Cable Flame Test of Mine Cable Test Apparatus In Accordance With Standard MT818 For Combustion Tester Equipment
|
Technical feature: import thermal 2mm stainless steel molding by numerically control,beautiful,durable Special burner and clamp ,complete accord with standard r 0e`12 quirement Use Silicon current controller adjust electric circuit Digital display test ......
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
IEC60245-1 Electric Static Flexibility Test Apparatus For Cable
|
...Test Equipment Electric Static Flexibility Test Apparatus For Completed Flexible Cables Standard: IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements. IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Application: It is used for checking mechanical strength of completed flexible cables. This test......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60245 Cable Testing Equipment , Static Flexibility Test
|
.../750 V-Part 1:General requirements, IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. It is used for checking mechanical strength of completed flexible cables. This test does not...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60851-3 Winding Wires Winding Test Apparatus For Enameled Round Wire
|
...test apparatus is suitable for measuring the flexibility, adhesiveness, thermal shock and other performances of the film of enameled round wire with nominal conductor diameter below 1.600mm; 3.Used with JRB-16 enameled round wire winding test bar; 4.This winding test apparatus......
Advanced Instruments Co.,Limited
|
IEC 60309 Compliant Flexibility Testing Apparatus for EV Plugs and Socket-Outlets
|
...Flexibility Testing Apparatus for EV Plugs and Socket-Outlets Complied Standards & Clauses The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2022 clause 26.4 table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. Equipment Structure The Flexibility Testing Apparatus......
Sinuo Testing Equipment Co. , Limited
|
Submit your “80n flexible cable test apparatus” inquiry in a minute :