1x2 FSW Mechanical Optical Switch SM 1310nm 1550nm 900um 0.5M Non Latching Without Connector
|
...Mechanical Optical Switch SM 1310nm 1550nm 900um 0.5M Non-Latching Without Connector Product Description Hilink's FSW-1×2 Optical Switch, which is famous for its high performance, low insertion loss and compact . This is achieved using a patent pending opto-mechanical......
Shenzhen HiLink Technology Co.,Ltd.
|
Mechanical Optical Switch Fiber Optic Splitter SM 1310/1550nm 1m 900um FC/APC 1x1 1x2 2x2
|
...Mechanical Optical Switch SM 1310/1550nm 1m 900um FC/APC Description 1xN mechanical fiber optic switch manufactured by ANC International Co., Limited connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching......
ANC International Co., Limited
|
900um Fiber Optical Switches 1x4 1x8 MEMS 1310/1550nm Non Latching
|
... monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system....
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
Mechanical Optical Switches Single Mode / Multimode 1×4 Customized Connector
|
...Mechanical Fiber Optic Switch Single Mode or Multimode Optical Switches Module 1×4 T type Mechanical Optical Switches Description GEZHI Photonics’ 1×4 T type Mechanical Fiber Optic Switch (1×4 Optical Switch) support all wavelength at 1260nm~1650nm or 850nm Multimode wavelength, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical...
Gezhi Photonics Co.,Ltd
|
High Channel Isolation 1260-1650 1×2L Mechanical Optical Switch For Network Test
|
...Mechanical Optical Switch Description: 1x2L Mechanical Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal.and 1x2L Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching...
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
1x4 Mechanical Optical Switch Fast Optical Switch 1260~1650nm Wavelength
|
... to switch the optical path. the excellent design makes the product have the advantages of high stability, high reliability, low loss, which are widely used in the switching and protection of optical network. Features: ● Epoxy-free on Optical Path ●...
SHKE Communication Tech Co., Ltd.
|
2x2 Bypass Mechanical Optical Switch 1310nm/1550nm No-Latching 3V SC/UPC
|
...Mechanical Optical Switch is used to turn on, turn off and switch optical signal. The 2x2B Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future. Features: Short switching......
Shenzhen Unifiber Technology Co.,Ltd
|
D2×2B Mechanical Optical Switch With LC Port Singlemode Bypass & Cross-Connect Design
|
D2×2B Mechanical Optical Switch Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High-Reliability Epoxy-free on Optical Path Latching and Non-latching Specifications Parameters Unit OSWD2×2B Wavelength Range nm 850±40 / 1300±......
Shenzhen Olycom Technology Co., Ltd.
|
1x1 Switch 5V DWDM MUX DEMUX Mechanical Optical Switch Non Latching
|
...tems for multiplexing and routing different channels of light into or out of a single mode fiber (SMF). This is a type of optical node, which is generally used for the formation and the construction of optical telecommunications networks. "Add" and "drop"...
Shenzhen UT-King Technology Co., Ltd.
|
Bypass 1x2 Optical Switch Fiber Optic Network Switch For Testing Wavelength 1310nm 1550nm
|
... an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been...
Guangdong Huajiayu Technology Co., Ltd
|
Submit your “900um mechanical optical switches” inquiry in a minute :