IEC60950-1 Annex AA Mandrel Test Device With Three 50N Weights
|
... forming REINFORCED INSULATION , are used. One sample at a time is fixed to the mandrel of the test fixture (Figure AA.1) as shown in Figure AA.2. A downward force of 150 N ± 10 N is applied to the free end of the sample (see Figure AA.3), using an...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60065 Figure 16 Mandrel Test Device For Insulation Anti Damage Strength Verification
|
... Application: Insulation anti damage strength verification for non separable thin layer materials. Test sample: Non separable thin layer material. Feature: The position of 10°and 230°are set with mechanical limit, not only to ensure the accuracy of...
KingPo Technology Development Limited
|
IEC 60950-1 Metal Mandrel Test Apparatus For Tensile Strength Verification
|
...Mandrel Test Apparatus For Tensile Strength Verification Product Information For Metal Mandrel Test Apparatus: This test apparatus conforms to IEC 62368-1:2018 clause 5.4.4, IEC60950-1:2013 clause 2.10.5.8, Annex AA, figure 14~16, IEC60558-1 Fig6, etc. It is used for tensile and electrical strength verification for non-separable thin layer materials. This test......
Sinuo Testing Equipment Co. , Limited
|
IEC60065 Mandrel Test Equipment For Insulation Film Abrasion Test
|
...Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel Test Equipment is designed according to IEC61588 figure 6, IEC60950 annex A, IEC60065 and GB1921. It is used for the insulating thin layer of the power transformer and supply unit as well as the similar products to do the spindle test, mechanical strength test and abrasion test. This test device...
Pego Electronics (Yi Chun) Company Limited
|
10 Freq/Min 220V 50Hz IEC Integrated Test Device for Circular saws
|
...Test Equipment Integrated Test Device For Circular Saw Switch And Lower Guard Standard: IEC60745-2-5 ‘Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws’.2003 Annex BB.20.102. EN 60745-2-5: 2010 clause 17.101 and clause 19.102.3. EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301. Application: It is used to test......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material
|
...Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test......
Dongguan Kingpo Technology Limited
|
IEC 60950 Communication Test Equipment , Mandrel Test Equipment HX9804
|
...n layer material. Feature:The position of 10°and 230°are set with mechanical limit,not only to ensure the accuracy of the test angle, but also to achieve a simple operation method; weight with a hanging ring, in case of a point is damaged because of too...
shanghai kerang technology co ltd
|
IEC 60811-504 2012 Mandrel Test Apparatus & Impact Test Apparatus
|
... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Impact Testing Apparatus Striking Element
|
...Testing Device Striking Element 2J 5J 10J 20J IEC60068-2-75 Parameters: Model(Energy) 2J 5J 10J 20J 50J equivalent mass(kg) 0.5 1.7 5 5 10 Dripping height(±1% mm) 400 300 200 400 500 Diameter(mm) 35 60 80 100 125 Standard: IEC60068-2-75 Annex A Application: This device is suitable for mechanical impact strength test......
Guangzhou Shice Equipment Co., Ltd.
|
Electric Vehicle Battery Enclosure Pressure Automatic Test System Single Station PLC Control
|
...Test System Complied Standards & Clauses of Electric Vehicle Battery Enclosure Pressure Automatic Test System This device complies with the standard IEC 60335-1: 2020-Annex BB-20.1. Equipment Overview of Electric Vehicle Battery Enclosure Pressure Automatic Test System Samples and Limits: This device can test monolithic batteries containing chemistry using metal ions. Test......
Sinuo Testing Equipment Co. , Limited
|
Submit your “annex aa mandrel test device” inquiry in a minute :