Anodizing Hard Oxidation Power Supply 11000A PLC Control Energy Saving
|
... based on the performance of Italian rectifier power supply (in line with the IEC-146 standard) and special oxidation process requirements, which is suitable for aluminum alloy architectural profile anodizing, aluminum alloy pot surface hard oxidation,...
Guangdong MEI-AL Technology Co., Ltd.
|
IGBT Controlled Oxidation Power Supply Rectifier Switch Mode 48V 300A
|
48V 300A IGBT controlled switch mode anodizing power supply 48V 300A IGBT controlled switch mode anodizing power supply is used to anodizing. such as sulfuric acid, chromic acid, oxalic acid Some inner part showed followed, just diffierent color. Some pics......
Chengdu Xingtongli Power Supply Equipment Co., Ltd.
|
4 Pin IDE 1 To 5 SATA 15 Pin Hard Drive Power Supply Splitter Cable
|
4pin IDE 1 to 5 SATA 15Pin Hard Drive Power Supply Splitter Cable Cord for DIY PC Sever 4pin to 15pin Power 60Cm...
Guangzhou Colorlink Electronic Technology Co., Ltd
|
Metal Oxide Power Supply Dropout Lightning Arrester
|
...the equipment. The installation of metal oxide gapless surge arresters at the entrance of the transformers improves their lightning performance and reduces the expected annual failure rate. However, arresters can be damaged, if the ......
ZHEJIANG XINKOU POWER EQUIPMENT CO.,LTD
|
Durable Deuterium Lamp Power Supply , Visible Ultraviolet Spectrophotometer DC Power Supply
|
...power supply-visible ultraviolet spectrophotometer Specifications: GTRK-02162.5 GTK-031510 Input Voltage: AC 85 - 265V Input Voltage: AC 85 - 265V Input Current: Max. 0.5A Input Current: Max. 0.5A Filament voltage:Preheating:DC 2.5V Lit:0V Filament voltage:Preheating:DC10V Lit:DC6-7V Anode Voltage: Preheating :DC 125V Lit:Max. DC 80V Anode Voltage: Preheating :DC 125V Lit:Max. DC 80V Anode Current: 300mA Anode......
Changzhou Geng Tai Electronics Co., Ltd
|
Three Pin Plug Power Supply Harness DC power cable 240mm Length
|
...Power Supply Harness DC power cable 240mm Length 1. Product description Three pin plug power supply harness DC power cable 240mm length selection of high quality copper core, strong conductivity, and the plug terminal with anti-oxidation, close joint characteristics. The exterior is made of PVC material, the body is soft and resistant to bending, and the anti- oxidation......
SHINEPLUS WIRE HARNESS & CABLE ASSEMBLY
|
D2 Multi Output Smps Power Supply For UV Spectroscopy Instruments
|
...power supply apply to UV spectra chromatography,LC,AA,HPLC Power supply for deuterium lamp & tungsten lamp Input voltage: AC 85 ~ 265V Maximum input current: 0.8 A Lamp wire voltage: preheating: DC2.5v (2.5v). DC 10V (10V), after light on: DC0 (2.5v).DC6 ~ 7V (10V) Highest anode voltage: preheating: DC 125V, after light on: DC 80V Anode......
Changzhou Bextreme Shell Motor Technology Co.,Ltd
|
Three Pin Plug Power Supply Harness DC Power Cable With Close Joint Characteristics
|
...Power Supply Harness DC power cable 240mm Length 1. Product description Three pin plug power supply harness DC power cable 240mm length selection of high quality copper core, strong conductivity, and the plug terminal with anti-oxidation, close joint characteristics. The exterior is made of PVC material, the body is soft and resistant to bending, and the anti-oxidation......
SHINEPLUS WIRE HARNESS & CABLE ASSEMBLY
|
Power Supply Hidden Desk Pop Up Sockets With 3.5 Audio Oval Shape Corner
|
... room and hotel. Desktop power plug made of zinc alloy material panel and excellent steel case. The panel is galvanized, anti-oxidative via anode oxidation process. There are silver or black matte color for panel surface. Gold, white and wood color is...
Guangzhou Boente Technology Co., Ltd (Bo Ente Industrial Co., Limited)
|
DC24V Deuterium Lamp Power Supply 110x78x35mm UV Spectra Chromatography
|
power supply for Deuterium lamp applied for UV spectra chromatography , atomic absorption,DEUTERIUM LAMP POWER SUPPLY Technical parameters: OWPS-0216DJ--2.5V OWPS-0216DJ--10V Input voltage: DC24V±10% input voltage: DC24V±10% Minimum input current: 2A minimum input current: 2A Filament voltage: 2.5v at preheating, 0 or 1V after lighting up Filament voltage: 10V after the preheating: 5-6v Anode current:300mA anode......
Changzhou Junqi International Trade Co.,Ltd
|
Submit your “anodizing hard oxidation power supply” inquiry in a minute :