Home > Electrical Equipment & Supplies > Electrical Instruments > Power Measuring Instrument >

Appliance Couplers Lateral Pull Test Apparatus

1-10 Results for

appliance couplers lateral pull test apparatus

from 9 Products

IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A

...Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A Equipment overview: Th coupler lateral pulling test apparatus is manfactured according to the IEC60320-1 clause 23.3 and figure 19. It is used to test the connector being pulled out of the appliance socket under lateral stress, so as to assess the mechanical strength of the coupler. Test principle: Plug a connector rated over 0.2 A into an appliance...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Lateral Pull Test Apparatus for Testing Appliance Couplers as per IEC60320-1

...o verify if the contact of connectors and appliance outlets have sufficient mechanical strength. A lateral pull force in parallel with the engagement face, is applied to the cable of the connector / plug connector in four directions in step of 90°±5°, a...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Coupler Lateral Pulling Testing Apparatus Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector. Technical Parameters: 1, Flexible cable bending height: 40±2 mm, adjustable. 2, Pull range: 0-100N. 3, Pull......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

0-100N IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

25mm Zipper Reciprocating Fatigue Life Testing Apparatus

...Zipper Reciprocating Fatigue Testing Machine Life Testing Apparatus Application : This machine applies to test the reciprocating pulling strength of zipper in vertical and lateral tension, when doing testing, the machine is pulling the zip slider by ......

Guangdong Aisry Instrument Technology Co., Ltd.

Address: Jianye Road No. 3, Yongqing Second Industrial Zone, Yongqing Village, Daojiao Town, Dongguan City, Guangdong Province,china.

Cable Anchorage Pull Force and Torque Test Apparatus for Charging Station

... 110, Figure 111 and Table 114. Product overview Samples and restrictions: Electric vehicle AC and DC charging station Test purpose: The flexible cord anchorage of the appliance shall relieve conductors at the terminals from pulling force and torque. This...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

IEC 60884-1 Flexible Cable Flexing Test Apparatus Flexing Angles Adjustable

...’ clause 23.4 and figure 21； IEC 60320-1 ‘Appliance couplers for household and similar general purposes –Part 1: General requirements’ clause 22.3 and figure 7. Application: Connectors/plug connectors shall be so designed that the ......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

IEC884 Plug Socket Tester , Lateral Stress Test Equipment LS-1 5N Lifting Weight

Test Apparatus for lateral stress LS-1 Product overview: The appliance conforms to the standard of IEC884 figure 13. It is suitable for checking socket of rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the electrical appliances......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain

...Lateral Strain Lateral Strain Test Apparatus Product details: The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the electrical appliances......

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Submit your “appliance couplers lateral pull test apparatus” inquiry in a minute :

*From:	Your email address is incorrect!
To:	HK LEE HING INDUSTRY CO., LIMITED Products: IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “appliance couplers lateral pull test apparatus” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0