ASTM A312 HFW FIN TUBE TP347H PER HEATING APPLICATION
|
ASTM A312 HFW FIN TUBE TP347H PER HEATING APPLICATION HFW Solid Finned Tubes short for High Frequency Welded Helical Spiral Solid Finned Tube Helical Finned Tubes provide the designer with high thermal efficiency and compact design solutions for a whole range of heat exchangers where clean flue gases are used. Helical finned Tubes are manufactured in both Solid and Serrated type.High Frequency Welded fin tube also called solid type fin tube......
Yuhong Group Co.,Ltd
|
DELLOK Solid Stainless Steel Helical ASTM A106 Welded Fin Tubes
|
... Service Introduction: High Frequency Resistance Welded Helical Steel Fin Tubes is widely used in the recovery of waste heat from boiler flue gas.The fin strip is welded continuously and spirally wound onto a polished bare tube. And the tube and fins are...
Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd.
|
ASTM A519 Welded Helical Finned Tubes For Heat Exchanger
|
....2 mm Fin height H 6~30 mm ±0.75 mm Tube thickness δ1 2~16 mm ±0.15 mm Fin thickness δ2 0.8~2.5 mm ±0.1 mm Unfinned tube ends length L1 customized ±1‰*L1 mm Unfinned tube ends length L2 customized ±1‰*L2 mm Maximum tube length L 0.5~25 m ±1‰...
TORICH INTERNATIONAL LIMITED
|
Solid Welded Helical Fin Tubes ASTM A213 T9 For Air Cooler
|
...Helical Fin Tubes ASTM A213 T9 For Air Cooler Chemical Composition (%) K90941 Grade C Mn P S Si Cr Mo T9 0.15 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00 0.90-1.10 Mechanical Properties K90941 Grade Tensile Strength,min Yield Strength (0.2%Offset,min) Tempering Temperature,min 60ksi (415 MPa) 30ksi (205 MPa) 1250°F [675°C] T9 Elongation in 2 in. Nrinell/Vickers Rockwell 30% 179HBW/190HV 89HRB ASME SA213/ASTM......
YUHONG HOLDING GROUP CO., LTD
|
Solid Welded Helical Fin Tube ASTM A213 T9 For Air Cooler
|
...Helical Fin Tubes ASTM A213 T9 For Air Cooler Chemical Composition (%) K90941 Grade C Mn P S Si Cr Mo T9 0.15 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00 0.90-1.10 Mechanical Properties K90941 Grade Tensile Strength,min Yield Strength (0.2%Offset,min) Tempering Temperature,min 60ksi (415 MPa) 30ksi (205 MPa) 1250°F [675°C] T9 Elongation in 2 in. Nrinell/Vickers Rockwell 30% 179HBW/190HV 89HRB ASME SA213/ASTM......
YUHONG HOLDING GROUP CO., LTD
|
ASTM A335 P11 HFW Serrated Helical Finned Tube for Petrochemical
|
... is a type of heat exchanger tube that is made of ASTM A335 P11 alloy steel with serrated fins made of Grade 11 alloy material. The serrated fins provide increased heat transfer efficiency by increasing the contact surface area between the fluid inside the...
YUHONG HOLDING GROUP CO., LTD
|
Stainless Steel 304 Laser Welding Helical Finned Tube High Performance
|
... strip vertically applied to the tube is welded at its foot by a welding technique developed and patented by us without filler metal to the tube wall. The use of the laser technique for the welding of finned tubes offers a number of advantages due to the...
JIANGSU RELIANCE THERMAL EQUIPMENT CO., LTD
|
Helical Finned Tube Continuously Welded Spiral Fin Tube For Heat Exchanger
|
... welded helically along the tube’s outer surface. They are typically made from carbon steel, stainless steel, or alloy steel depending on the thermal and corrosion requirements. The fins are mechanically bonded or continuously welded to the base tube to...
TORICH INTERNATIONAL LIMITED
|
Finned Tubes Elliptical Type Flat Tube Heat Exchanger Helical Finned Tube
|
Finned Tubes Elliptical Type Flat Tube Heat Exchanger Helical Finned Tube The elliptical finned tube [1] is a heat exchange element composed of a base tube elliptical tube and outer fins. The common ones are elliptical rectangular finned tubes, elliptical elliptical finned tubes, elliptical round finned tubes, spiral elliptic flat tubes, elliptical H-shaped finned tubes and so on. Oval finned tubes......
Torich International Limited
|
Customizable Automobile Equipments ASTM A519 Seamless Mechanical Tubing （custom made)
|
... time is 30 days. 1. Description We are specialized in exporting all kinds of ASTM A519 seamless steel tubes for machinery. These mechanical pipes are made of carbon steel and alloy steel by cold drawing or hot rolling. The chemical composition and...
SUZHOU FRANK STEEL CO.,LTD.
|
Submit your “astm a519 helical finned tubes” inquiry in a minute :