ASTM F1921 Flexible Package Hot Tack Testing Machine with PLC Control
|
... surfaces immediately after the seal has been made and before it cools to room temperature. Hot Tack tester is especially important for vertical form-fill-seal packaging. Features: Hot tack, heat seal, peeling and tensile test items are integrated in...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
ISO Loop Tack Measurement Machine , 0-100N Loop Tack Testing Instrument
|
...Tack Measurement Machine 0~100N Loop Tack Testing Instrument Standard FINAT(FINAT test method No. 9: loop tack measurement), PSTC-16(Loop tack), ASTM D6195-03(Standard test methods for loop tack), GB/T31125-2014(Test method for initial viscosity of adhesive tape - ring method) and etc. Test Principle Fully contact the loop sample and standard float test......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
220V 50Hz Loop Tack Testing Machine , Primary Adhesion Tester 50N
|
... and other products. It is to separate the annular sample and the test board at a constant speed of 24mm2 at 300mm/min after reaching a constant speed of 24mm2 at a constant speed of 300mm/min (the foreign ......
Perfect International Instruments Co., Ltd
|
Thermostatic Tape Holding Tack Test Machine
|
...tack test machine Designed and manufactured in accordance with GB 4851 (Test Method for Pressure Sensitivity of Pressure-Sensitive Adhesive Tapes) and Adhesive Adhesion Test Standards. It is suitable for pressure-sensitive adhesive tapes, stickers, plasters, hot melts and other products to carry out the adhesion test. Test principle: Hang the test plate with the adhesive sample vertically on the test......
Shanghai Glomro Industrial Co., Ltd.
|
ASTM C411-82 Temperature Testing Equipment For Thermal Insulation Maximum Of Insulating Cements
|
ASTM C411-82 Thermal Insulation the Maximum Service Temperature Testing Equipment Description: The test method refers primarily to high-temperature insulations that applicable to hot-side temperatures in excess of 66℃. It is used for materials such as preformed insulations, insulating cements, blankets, and the like, by proper laboratory preparation of the samples. Standards: ASTM C411-82:Standard Test Method for Hot......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
TORICH ASTM A53 Hot Rolled Electric Resistance Welded Pre Galvanized Rectangular Pipe
|
... 52,ST 37, 16Mn Size OD: 20*30-400*600mm WT: 0.5 - 2.5 mm Length: 1-12m Technique Hot Rolled, Electric Resistance Test Tensile Test, Hydraulic Test, Eddy Current Test Application Used For Water, Gas, Stream,...
TORICH INTERNATIONAL LIMITED
|
ASTM D573 Hot Loop Aging Anti - Yellow Testing Machine With EGO Over - Temperature Guiding Light
|
ASTM D573 Hot Loop Aging Anti - Yellow Testing Machine With EGO Over - Temperature Guiding Light Main feature: Aging:this machine is to promote the deterioration of vulcanite, and then to calculate the change rate of ......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Salt Spray Hot Humid Testing Programmable Pt100 Test Sensors Corrosion Chamber
|
..., ASTM, JIS, ISO standards, salt spray test is for a variety of materials surface after coating, electroplating, anodizing, anti-rust oil, anti-corrosion treatment, test the corrosion resistance of its products. Specification Dimensions: 108L, 270L, 600L,...
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Salt Spray Hot Humid Testing Programmable Pt100 Test Sensors Corrosion Chamber
|
... CNS, ASTM, JIS, ISO standards, salt spray test is a variety of materials for the surface after coating, plating, anodizing, anti-rust oil, anti-corrosion treatment, testing the corrosion resistance of their products. Structural features 1, inside and...
Hai Da Labtester
|
ASTM Seamless Hot Galvanized Grade 2205 Duplex Stainless Steel Pipe
|
.../A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the Thpe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO. 4. The Pipe lengths : Unless otherwise agreed upon, all...
TOBO STEEL GROUP CHINA
|