Blocked Latching Mechanical Optical Switch 1310nm LC UPC APC 3V 5V 500mW
|
... 1 incoming optical signals into 1 output fibers. This is achieved using a opto-mechanical configuration and activated via an electrical control signal. The switch has integrated electrical position sensors. Based on thin film filter technology that...
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
Mini Size 1x8 Opto-Mechanical Optical Switches 8x1 Latching Fiber optic Switch
|
...Optical Switches 8x1 Latching Fiber optic Switch Mini 1x8 Mechanical Optical Switch GEZHI Series Mini 1x8 fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. Latching operation preserves the selected optical path after the drive signal has been removed. The switch......
Gezhi Photonics Co.,Ltd
|
Non Latching Fiber Optical Switch 1x1 1260-1670nm Low Insertion Loss 0.5dB
|
optical switch 1x1 A 1260-1670 nm Latching and Non-latching Low Insertion Loss Insertion Loss Typ 0.5dB optical route pins 1×1A Optical Path Electric Drive Sensor Status Pin 1 Pin 2 Pin3 Pin4 Non- Latching Close GND GND OPEN P1- P2 V+ GND CLOSE Latching Close -- -- V+ GND P1- P2 GND V+ -- -- Electrical parameters Voltage current Resistor 5V Latching 4.5~5.5 36~44mA 125Ω 5V Non-Latching 4.5~5.5 26~32mA 175Ω 3V Latching......
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
1x1 1x2 2x2B Mechanical Fiber Optical Switch Non Latching 5V 3V FC APC
|
...latching Mechanical Fiber Optical Switch 5V/3V FC/APC 1x2T optical switch (OSW) features low insertion loss, low driving power, small size, and high switching speed. The switch is designed for use in optical fiber communication networks and measurement instruments. The switch consists of two ports that selectively transmits redirects, or blocks optical power in a fiber optic transmission line. The optical switch......
Shenzhen Unifiber Technology Co.,Ltd
|
Latching 1260-1650nm Single Mode 500mW 2x2F Fiber Optical Switch
|
Latching 1260-1650nm Singlemode 2x2F fiber Optical Switch Features Low Insertion loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Applications Optical Network Protection/Restoration Optical Singnal Routing Configurable Optical......
Shenzhen linkopto Technology Co. Ltd
|
1X1 Channel Fiber Optical Switch Latching Single Mode
|
...Fiber Optical Switch Latching Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical......
HTD Fibercom Co., Limited
|
SC APC Mechanical Latching Fiber Bypass Switch , Multimode 2X2 Optical Switch
|
... an incoming optical signal into a selected output fiber. The 2x2B MM Bypass Mechanical Fiber Optic Switch (2X2B MM Optical Switch) support all wavelength at 850nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well...
Shenzhen HiLink Technology Co.,Ltd.
|
Factory OEM/ODM Fiber Optic Switch L3 10Gigabit Fiber Managed Switch 24 SFP and 6 Combo Port
|
Fiber Optic Switch L3 10Gigabit Fiber Managed Switch 24 SFP and 6 Combo Port Description The OFS-MXF4GSF24T6-I 10 Gigabit Managed Switches arestandard third-layer non-blocking switch. Based onhigh-performance ASIC chip technology, the modular structuredesign, which have a capability of multilayer switching......
Shenzhen Optfocus Technology Co., Ltd.
|
16 1000M SFP 8 Combo Uplink Fiber Switch Fiber Optic Switch 24 Port
|
...Fiber optic equipment 24 port switch 16 1000M SFP + 8 Combo Uplink Fiber Switch FOWAY5200-24FS-8C 16 1000M SFP + 8 Combo Uplink Fiber Switch Character ✔Support 16 100/1000M SFP (or SFP-1000BaseT RJ45 ) access and 8 Gigabit Combo port (100M/1000M SFP optional, or 10/100/1000M RJ45 port) ✔Support the default 100M,1000M SFP and the SFP-1000BaseT RJ45 hot plug ✔Support full rate, full-duplex non-blocking......
HiOSO Technology Co., Ltd.
|
1x2 Mechanical OSW Fiber Optic Switch For System Monitoring
|
...Fiber Optic Switch Introduction Olycom's 1x2 Mechanical Fiber Opitc switch is used to turn on and turn off optical signal. The 1x2 Mechanical Fiber Optic Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical......
Shenzhen Olycom Technology Co., Ltd.
|
Submit your “blocked latching fiber optical switches” inquiry in a minute :