Home > Tools & Hardware > Power Tools > Power Screw Drivers >

Clause 22 3 Plug Torque Test Apparatus

1-10 Results for

clause 22 3 plug torque test apparatus

from 8 Products

IEC 60335-1 Clause 22.3 Plug Torque Test Apparatus 0.25Nm To 0.4Nm Torque Force

..., IEC 60884-1 2013 clause 14.23.2, IEC60065 clause 15.4.1 and figure 11, etc. This device is used to check the torque applied to the output socket after the device with the plug inserted into the fixed output socket is inserted into the output socket. The...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

8mm Plug Torque Test Apparatus To Testing The Strain Force Of Insertion

...clause 15.4.1Plug torque test apparatus HC9908 Standard: Conforms to IEC60065:2014 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.2, IEC 60335-1 clause 22.3, IEC60065 clause 15.4.1 and figure 11 Application: This device is use to test the strain force of insertion. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. Test......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Stainless Steel Plug Torque Test Apparatus Force Arm 0-200mm IEC60065 IEC60884-1

Plug Torque Test Apparatus for Devices Forming a Part of the Main Plug IEC60065 IEC60884-1 1. Introduction Plug torque test device is designed according to IEC60065 clause 15.4.1 and figure 11, IEC60950-1 clause 4.3.6, IEC60884-1 clause 14.23.2 and etc..It is applied to check the socket outlet mechanical strength of direct plug......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Connection Plug Torque Test Apparatus for Devices forming a part of the MAINS Plug

... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots......

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

IEC62196-1 Electric Vehicle Plugs And Connectors Cable Pull And Torque Test Apparatus

... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. Pull is realized by single-phase speed-regulating motor to...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage

...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC60884-1 Hardened Steel Manual Plug Socket Tester Apparatus

Plug Socket Test Apparatus For Verification Of Maximum And Minimum Withdrawal Force Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 22.1, clause 22.2, figure 18&19 and table 16. Application: This device is used for verify whether the maximum withdraw force and minimum withdraw force to pullout a plug or plug......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Steel Pendulum Impact Tester HC9921 1000mm Length Manual Operation

...Test Apparatus HC9921 Standard: IEC60884-1 2013 clause 24.1 and figure 22~26, IEC60669-1, IEC60068-2-75 Application: This device is suitable for mechanical strength test to plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories for household and similar purposes. Test sample: plugs......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Submit your “clause 22 3 plug torque test apparatus” inquiry in a minute :

*From:	Your email address is incorrect!
To:	shanghai kerang technology co ltd Products: Steel Pendulum Impact Tester HC9921 1000mm Length Manual Operation
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “clause 22 3 plug torque test apparatus” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0