Home > Electrical Equipment & Supplies > Wires, Cables & Cable Assemblies > Cable Manufacturing Equipment >

Clause 5 1 Abrasion Test Equipment

1-10 Results for

clause 5 1 abrasion test equipment

from 9 Products

IEC 60065 Clause 5.1 Label Marking Abrasion Test Equipment

...Clause 5.1 Label Marking Abrasion Test Equipment Product information: This label marking abrasion test equipment is designed and manufactured according to the standard requirements of IEC 60065:2014 clause 5.1, IEC 60335-1 clause 7.14, IEC 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9. The Alcohol Rubber Rubbing Tester is suitable for all kinds of plastic injection, silk screen surface for abrasion test......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC Test Equipment Label Marking Abrasion Testing Equipment Manually Operation

IEC 60065:2014 clause 5.1 Label Marking Abrasion Test Machine Product presentation: Label wear testing machine is used to test the wear resistance of label materials. It is mainly used to simulate the degree of wear the label is subjected to in daily use......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC62196 Electric Vehicle Label Marking Abrasion Test Apparatus

...Abrasion Test Apparatus Complied Standards & Clauses IEC 62196-1: 2020 Ed.4CDV clause 8.7, figure 8. Equipment Overview This label marking abrasion test apparatus conforms to IEC 62196-1Ed.4CDV clause 8.7, figure 8. It is used to verify the durability of marking. The test......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

ISO 6722-1 Clause 5.12.4.1 Apparatus For Sandpaper Abrasion Test / Auto Cable Insulation Jacket Abrasion Resistance Test

ISO 6722-1 Clause 5.12.4.1 Apparatus for Sandpaper Abrasion Test / Auto-Cable Insulation Jacket Abrasion Resistance Test Standards: ISO 6722-2006, QC/T 730-2005, JASO D608-92, JASO D611-94, SAE J1127, SAE J1128, JIS C3406 etc. Application: Applied to test......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

PLC IEC Test Equipment For Abrasion Resistance Speed 20 ± 5mm/s

...Test Equipment For Abrasion Resistance Test With Speed Of 20 ± 5mm/s Standard: IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 21.2; IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ clause 2.10.8.4 and Figure 2K. Application: It is used for abrasion resistance test......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

ISO6722-1 Motor-Driven Scrape Abrasion Test Apparatus For Testing Auto Cables

ISO6722-1 Motor-Driven Scrape Abrasion Test Apparatus for Testing Auto Cables 1. Introduction The scrape abrasion test apparatus is designed to meet the test requirements of ISO6722-1 clause 5.12.4.2 and figure 7, DIN72551-5, QC/T-730, JASO D611-94 and ......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC60245 1 Wire Testing Equipment , Abrasion Test Apparatus HDX1304

Electric Wire Abrasion Test Apparatus HDX1304 Parameters: Power supply AC220V 50Hz Fixed shaft diameter Φ40±0.3mm Test rate Single strokes 40±1 times/minute Test stroke 0.1mm up-and-down movement Working station 3 Weight 500±5g*3 Counter 0~999999 (can be ......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

CNAS Abrasion Resistance Test

Abrasion Strength Resistance Testing Machine IEC60335-1 clause 21.2 Product information: The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard ......

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

220V 200W Strength Checking Machine Anti Abrasion For Baby Car Handle

Stroller Tester Baby Car Handle Strength Testing Machine EN1888 Clause 9.2 HZ-1214 Equipment Summary: 1. To assess the reasonableness of the handle structural strength to rising and under pressure stroller handle. 2.Power supply: 220 V 200 watts, source 7 ......

Dongguan Lixian Instrument Scientific Co.,LTD

Address: ROOM 223,UNIT 2,BUILDING 2,NO.5MHOUJIE DONGYE ROAD,HOUJIE TOWN,DONGGUAN CITY,GUANGDONG PROVINCE.

Submit your “clause 5 1 abrasion test equipment” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Dongguan Lixian Instrument Scientific Co.,LTD Products: 220V 200W Strength Checking Machine Anti Abrasion For Baby Car Handle
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “clause 5 1 abrasion test equipment” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0