IEC 60065 Clause 5.1 Label Marking Abrasion Test Equipment
|   | 
                                            IEC 60065 Clause 5.1 Label Marking Abrasion Test Equipment Product information: This label marking abrasion test equipment is designed and manufactured according to the standard requirements of IEC 60065:2014 clause 5.1, IEC 60335-1 clause 7.14, IEC 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9. The Alcohol Rubber Rubbing Tester is suitable for all kinds of plastic injection, silk screen surface for abrasion test......                                         
                                            Sinuo Testing Equipment Co. , Limited
                                         
 | 
IEC60335-2-64 Clause 15.1.1 IEC Test Equipment Splash Water Test Device
|   | 
                                            ...Clause 15.1.1 IEC Test Equipment Splash Water Test Device Product information This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test. The apparatus shown in Figure 101 is used. During the test......                                         
                                            Guangzhou HongCe Equipment Co., Ltd.
                                         
 | 
10KW 300V Load Bank For Externally Ballasted Lamp Loads IEC Test Equipment
|   | 
                                            ...clause 20; IEC 60669-1 ‘Switches for household and similar fixed electrical installations – Part 1: General requirements’ clause 19.2 Application: Switches intended for externally ballasted lamp loads shall withstand, without excessive wear or other...                                         
                                            HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
                                         
 | 
Toaster IEC Test Equipment For Switch Power On And Off Endurance
|   | 
                                            Toaster IEC Test Equipment For Switch Power On And Off Endurance IEC60335-2-9 Clause 19.101 IEC Test Equipment Toaster Switch Endurance Tester Standard IEC60335-2-9 clause 19.101of Household and similar electrical appliances – Safety: Part 2-9: ......                                         
                                            Dongguan Kingpo Technology Limited
                                         
 | 
Turntable -IEC60529 Ingress Protection Test Equipment , IEC Test Equipment
|   | 
                                            ... loading platform can be inclined 15°to meet with IPX2 inclined testing requirement. Nomal Test 1. Turntable installation Loosen the screw on the upper part of the supporting column, rotate the upper support stage, can adjust the height of turntable. The...                                         
                                            KingPo Technology Development Limited
                                         
 | 
IEC60884 Figure 14 100N IEC Test Equipment , Non Solid Pins Testing Device
|   | 
                                            IEC60884 Figure 14 Device For Testing Non Solid Pins Load Weight Product overview: The appliance is checked by the test of clause 24 and, for pins which are not solid, by the following test which is made after the test of clause 21. A force of 100 N is ......                                         
                                            Guangzhou Shice Equipment Co., Ltd.
                                         
 | 
IEC 62196 EV Connector Testing Equipment Breaking Capacity Test Equipment
|   | 
                                            ... 62196-3 Ed.4CDV 2020 clause 22 and 23. IEC 60309-1: 2012 clause 20 and clause 21. Equipment Overview This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and...                                         
                                            Sinuo Testing Equipment Co. , Limited
                                         
 | 
1000mm 800mm 600mm Electronic Testing Equipment IEC60335 Stability Test Bench
|   | 
                                            ...Testing Equipment IEC60335 Stability Test Bench Standards: It is to determine the stability of electric appliances which are used on a table or on the floor In accordance with IEC 60065 / 1998-07 clause 19.1, IEC 60335-1 / 1991-04 clause 20.1, IEC 60601-1 /1988 clause 24.1, IEC 60950 / 1991 + Amendments, modified, clause 4.1. 1, EN 60335-1 / 1994 and A11 / 1995 clause......                                         
                                            SKYLINE INSTRUMENTS CO.,LTD
                                         
 | 
Endurance Appliance Test Equipment Refrigerator Open Sides Door Performance
|   | 
                                            IEC 62552 And IEC 60335-2-24 Refrigerator Plc Two Open Sides Door Performance And Drawer Endurance Tester Test Project: IEC 60335-2-24 clause 22.112 Doors and lids of compartments in appliances test equipment IEC 62552 And IEC 60335-2-24 Refrigerator Plc Two Open Sides Door Performance And Drawer Endurance Tester IEC 62552 clause 11.2 ,clause 11.3 Endurance test for doors ,lids and drawers . IEC 62552 And IEC......                                         
                                            shanghai kerang technology co ltd
                                         
 | 
EV Connectors Testing Equipment IEC 62196 Test Finger Probe B with 42V Electric Indicator
|   | 
                                            ...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to...                                         
                                            Pego Electronics (Yi Chun) Company Limited
                                         
 | 
