Luminaries Testing IEC60598-2-21 Cold Bending Test Device
|
...test whether the wire or rope lamp has cracks when it is wound at low temperature. The lamp is wound on the appliance shown in Figure 2, with a winding diameter of 4-5 times its own ......
SKYLINE INSTRUMENTS CO.,LTD
|
manual IEC Test Equipment IEC 60811 Cold Bend Test Apparatus For Cables Sheaths And Insulation
|
... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to...
Guangzhou HongCe Equipment Co., Ltd.
|
Wire Core Circular Insulation Cable Testing Equipment Cold Bend Test Machine
|
... test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be...
KingPo Technology Development Limited
|
Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment
|
Cold Bend Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94. It is applied to the test......
Pego Electronics (Yi Chun) Company Limited
|
Digital Display Optical Cable Repeated Bending Test Device With Separated Structure
|
...bending test device is used to detect optical fiber cables to withstand repeated bending capability, which meets the test requirements to optical cable of method E6. Adopt reciprocating motion structure, completely eliminate the possibility of emergence lock, swing arms are smooth and low noise. Non-contact sensor detects repetitive bending times that avoid abrasions to devices......
Advanced Instruments Co.,Limited
|
Stainless Steel Cable Testing Machine , Electric Cable Cold Bending Test Machine
|
Cold Bending Test Machine HDX1307 Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. Application:This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. Test......
shanghai kerang technology co ltd
|
12 Sets Finished Sole Bending Test Machine / Cold Resistance Bending Leather Testing Machine
|
...Bending Test Machine/Cold Resistance Bending Leather Testing Machine Specifications: 1. Testing the resistance of bending of finished shoes 2. Easy operation Product usage: Finish Shoe or Sole Flexing Test Equipment is suitable for testing the soles, finished shoes to the resistance to bend nature, or check the location and extent of cracking in order to improve product quality. Specifications: Bending......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Low Temperature Bending Testing Machine For Footwear Material Test , Rubber Tester
|
... for the cold weather resistance test of soles, rubber and plastic products of shoe and synthetic leather to understand the adaptive capacity to cold weather. The inner testing box can install various bending fixtures. The machine use stainless steel for...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
6-station Taper Swing Wire Bending Test Machine Appearance Size 1400*650*850mm
|
... test with headphone cable, USB cable, power cord, etc. The product to be tested is fixed to the test fixture and a certain load is applied. The wire is fixed on the swing arm of the device and the wire is at an angle of 45° to the terminal. The number of...
Dongguan jie dong test equipment co.,LTD
|
Electronic Footwear Testing Equipment Vertical Bending Test Chamber
|
... leather and other materials or finished products, and to understand the situation of materials or finished products to adapt to cold climate or cold regions. Standard: ASTM-D1790, D1593, JIS-K6545, the HB-T2877 Specification: Temperature range: -50 ° C...
Dongguan Hust Tony Instruments Co.,Ltd.
|
Submit your “cnas cold bending test device” inquiry in a minute :