Sign In | Join Free | My futurenowinc.com
futurenowinc.com
Products
 Search by Category
Home > Electrical Equipment & Supplies > Wires, Cables & Cable Assemblies > Cable Manufacturing Equipment >

Cold Bend Test Apparatus For Cables

1-10 Results for

cold bend test apparatus for cables

from 23 Products

manual IEC Test Equipment IEC 60811 Cold Bend Test Apparatus For Cables Sheaths And Insulation

China manual IEC Test Equipment IEC 60811 Cold Bend Test Apparatus For Cables Sheaths And Insulation on sale
... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to...
Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Cold Bend Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2

China Cold Bend Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2 on sale
Cold Bend Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2 Product description: This device is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. According to the standard IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables......
Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Manual Control 60811 IEC Test Equipment Cold Bend Testing Apparatus

China Manual Control 60811 IEC Test Equipment Cold Bend Testing Apparatus on sale
... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

IEC 60598-2-21 Figure 2 Cold Bend Test Apparatus To Measure Dynamic Bending Performance Of Wire And Cable

China IEC 60598-2-21 Figure 2 Cold Bend Test Apparatus To Measure Dynamic Bending Performance Of Wire And Cable on sale
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending......
KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment

China Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment on sale
Cold Bend Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94. It is applied to the test the cores of circular cross-section having an external diameter up to and including 12.5mm, sector shaped cores when it is not possible to prepare dumb-bells, and cables......
Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus

China IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus on sale
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the...
Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

IEC60851-3 Bending Test Apparatus For Flat Wires With Test Bars

China IEC60851-3 Bending Test Apparatus For Flat Wires With Test Bars on sale
Performance Characteristics 1.Executive standard: GB/T4074.3-2008,IEC60851-3; 2.This bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and ......
Advanced Instruments Co.,Limited

Address: Hi-tech Developing Industrial Area, Liuyang City,Changsha,Hunan Province,China

Stainless Steel Cable Testing Machine , Electric Cable Cold Bending Test Machine

China Stainless Steel Cable Testing Machine , Electric Cable Cold Bending Test Machine on sale
Cold Bending Test Machine HDX1307 Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. Application:This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. Test sample:Cables......
shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Computerized Single - Column Tensile Test Apparatus For Metal Tensile Testing

China Computerized Single - Column Tensile Test Apparatus For Metal Tensile Testing on sale
..., such as rubber, plastic, wire and cable, fiber optic cable, safety belt, safety belt, leather belt composite, plastic profile, waterproof coil, steel pipe, copper, profile, spring steel, Stretching, compression, bending, shearing, peeling, tearing,...
ASLi (CHINA) TEST EQUIPMENT CO., LTD

Address: No. 7, 1/F, Bldg. C, Jinhui Industrial Park, Jiuxibian Village, Lixin Community, Dongcheng Dist.

Cable Bending Flexing Test Apparatus 180 Degrees 220v 50 60HZ 500 Watt

China Cable Bending Flexing Test Apparatus 180 Degrees 220v 50 60HZ 500 Watt on sale
180-degress, Wire/Cable Bending Tester (MY-XC-C6), with competitive price, both OEM and ODM available from us Technical Specification 1. R angle :R3,R5,R12.7, replaceable fixture 2. Test speed: 5-60 times / min, adjustable 3. Test times:99999999 times 4. ......
Shenzhen Mingyu Instrument And Equipment Co., Ltd.

Address: No.2 plant, Henglu Industrial Zone, Songgang Town, Bao'an District, Shenzhen, China, 518105.
Submit your “cold bend test apparatus for cables” inquiry in a minute :
*From:
Your email address is incorrect!
To:

Shenzhen Mingyu Instrument And Equipment Co., Ltd.

Products: Cable Bending Flexing Test Apparatus 180 Degrees 220v 50 60HZ 500 Watt
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details:
  • --Self introduction
  • --Required specifications
  • --Inquire about price/MOQ
Your message must be between 20-3,000 characters!
 
Please reply me within 24 hours.
Yes! I would like your verified suppliers matching service!
Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.
Submit “cold bend test apparatus for cables” inquiry
*From:
Your email address is incorrect!
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details:
  • --Self introduction
  • --Required specifications
  • --Inquire about price/MOQ
Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!
Inquiry Cart 0