IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test
|
... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at...
Pego Electronics (Yi Chun) Company Limited
|
IEC62196-1 EV Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and...
Sinuo Testing Equipment Co. , Limited
|
IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and...
KingPo Technology Development Limited
|
IEC62196-1 Electric Vehicle Plugs And Connectors Cable Pull And Torque Test Apparatus
|
... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. Pull is realized by single-phase speed-regulating motor to...
Sinuo Testing Equipment Co. , Limited
|
IEC 60335 Power Cord Twice Tension And Torque Test Apparatus Can Be 120N
|
...: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
60 Times/min Soft Cable Retention Testing Apparatus Wire Crimping Test Device
|
...Cable Retention Testing Apparatus Wire Crimping Test Device Product details: The cable retention test device is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is used to test cord retention and check the effectiveness of the retention of the cable and cord anchorage. Test method: The cord anchorage is used in the normal way, clamping screws, if any, being tightened with a torque......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60884-1 Flexible Cable Flexing Test Apparatus Flexing Angles Adjustable
|
... 21; IEC 60320-1 ‘Appliance couplers for household and similar general purposes –Part 1: General requirements’ clause 22.3 and figure 7. Application: Connectors/plug connectors shall be so designed that the cord cannot be...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
UL1685 Lab Testing Machine, Electrical and Optical-Fiber Cables Flame Test Apparatus
|
...Cable Burning Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC60065 Figure 11 Socket Outlet Torque Test Apparatus
|
IEC60065 Figure 11 Socket outlet Torque Test Apparatus Product information: This equipment is according to the requirement standard of IEC60065 Figure 11 and IEC60950.1 clause 4.3.6 to manufacture. A device provided with pins intended to be introduced int......
Dongguan Kingpo Technology Limited
|
Connection Plug Torque Test Apparatus for Devices forming a part of the MAINS Plug
|
... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots......
HK LEE HING INDUSTRY CO., LIMITED
|
