Copper Alloy Micro Fuses For Cars , DC1500A Mini Cartridge Fuse
|
Low Voltage Fuse Automotive Blade Fuse Mini Cartridge Fuse Material: Noumenon: Ceramic Pins: Copper alloy Product presentation Rated Voltage 额定电压 32VDC/58VDC/80VDC Type Protection 保护类别 Time-lag慢断 Rated Current 额定电流 5A-200A ......
Dissmann | Global Expert Fuse for EV | HEV | Photovoltaic | Battery | Energy Storage Solutions
|
Copper Alloy PCB Holder Fuse Block Used For 6.35x31.8mm Glass Ceramic Fuses
|
... Copper Alloy Tinned T 0.5mm TERMINAL Copper Alloy Tinned T 0.8mm Specifications Dielectric Strength For 60 Seconds 1200VAC Min. Suitable Rated Curent 25A250V. Insulation Resistance At 500 V DC 500M Ω Min. Temperature Rise 30°C with dummy fuse /85°C...
Dongguan Tianrui Electronics Co., Ltd
|
Coating 10 μM Nickel For Molybdenum Copper Alloy Based Plate For Igbt Semiconductor
|
|
...a metal material that uses a molybdenum-copper substrate as a base material and covers a uniform nickel layer on the surface of the molybdenum-copper substrate by electroplating a nickel layer. This substrate has high strength, high thermal conductivity,...
Shaanxi Peakrise Metal Co.,Ltd
|
Coating 10 μM Nickel For Molybdenum Copper Alloy Based Plate For Igbt Semiconductor
|
|
...a metal material that uses a molybdenum-copper substrate as a base material and covers a uniform nickel layer on the surface of the molybdenum-copper substrate by electroplating a nickel layer. This substrate has high strength, high thermal conductivity,...
Shaanxi Peakrise Metal Co.,Ltd
|
Copper Alloy Seamless Tube ASME B111 CuNi 90/10 C70600 15MM 25MM 50MM Water Treatment Air Cooler Heater
|
... alloys up 31/8 in, inclusive, in dimeter, for use in surface condensers, evaporators, and heat exchangers. tubes for this application are normally made from the following coppers or copper alloys: Copper or Copper Alloy Previousoy Use Type of Metal UNS No...
Yuhong Group Co.,Ltd
|
Machined Surface Tungsten Nickel Copper Alloy W90Ni6Cu4 W90Ni7Cu3
|
...Copper Alloy Tungsten Nickel Copper Alloy Method: 1), Blending of tungsten powder with other metal powders and a bonding agent, cooling and sieving. 2), Pressing the blended powder to the required shape (allowing for shrinkage during the final processing), and shaping the green part component. 3). Pre-sintering the pressed components to remove the bonding agent. Final sintering in the hydrogen fed furnace to fuse...
JINXING MATECH CO LTD
|
20A SL-1538 Base Mount Fuse Holder Copper Alloy PCB Blade Fuse Holder
|
...Fuse Holder 20A Description Of The Mini Automotive Blade Fuse Holder 20A Vertical mount mini blade fuse holder are designed for spacesaving installation with high reliability and availability , houisng made of high performances PA66 nylon and terminal made of copper plated . Max current can be up to 20A and rated voltage is 32VDC, offer a board mount option for Automotive fuse...
Dongguan Ampfort Electronics Co., Ltd.
|
Forging C71500 C10920 Copper Alloy Sheet Decorative Brass Sheet 0.5 Mm 0.5 Mm 200mm
|
... alloy and special brass alloy.Different from normal brass alloy, special brass alloy is a multi-component copper alloy composed with Sn,Mn,Ni, Fe, Si and other elements.Special brass alloys have better brazing properties than normal copper-zinc alloys.It...
Jiangsu Xinyuanxing Metal Products Co.,Ltd
|
ASTM B111 C44300 O61 Copper Alloy Steel Heat Exchanger Tube For Condensers
|
... specifies the materials, mechanical properties, and dimensions of the tubes used in heat exchange systems, ensuring quality, performance, and uniformity. C44300 is a specific copper alloy within the broader family of copper alloys. The "C...
YUHONG HOLDING GROUP CO., LTD
|
C2680 C26800 Copper Alloy Rod 10 Oz 10 Ounce 10 Pound Copper Metal Bar
|
...Copper Alloy Rod For Building Construction Numerous copper alloys have been formulated, many with important uses. Brass is an alloy of copper and zinc. Bronze usually refers to copper-tin alloys, but can refer to any alloy of copper such as aluminium bronze. Copper......
Lianyungang Dapu Metal Material Co., Ltd
|
