Flat Cartridge Heaters Flat Cross Section 7x15mm For Special Moulds
|
Flat Cartridge Heaters Flat Cross Section 7x15mm For Special Moulds Description: Flat tubular cartridge Heaters are designed as an alternative form of round cartridge heater. It is designed mainly used on the mold heating, and liquid heating, and any applications need to increase the heating area with limiting heating space. The flat tuburlar cartridge Heaters......
Wuhan Global Metal Engineering Co., Ltd
|
3D×38mm Flat Cross-Section Dull Acrylic Staple Fiber | Textile Grade
|
... material. Its core characteristic lies in the flat cross-section design, which imparts unique luster, a dry hand feel, and excellent stiffness to the final fabric. Combined with the full dull treatment, the ......
Wuxi Xilan New Material Technology Co., Ltd.
|
304 Steel Obstruction 15mm Rectangular Cross Section IEC 60601-1
|
... IEC 60601-1 304 steel Obstruction a solid vertical plane obstruction with a rectangular cross-section, 15 mm high and at least 20 mm wide that is affixed flat on the floor. The upper corners of the obstruction may have radiuses of up to 2 mm applied....
KingPo Technology Development Limited
|
Customizable Cr20Ni80 Alloy Wire For Different Cross Sectional Areas And Lengths
|
...Cross-Sectional Areas And Lengths Introduction: Cr20Ni80 alloy wire is a high-resistance alloy wire composed of 20% chromium and 80% nickel. It has high resistivity and low temperature coefficient, making it suitable for circuits and equipment that require stable resistance. This alloy wire is often used in resistors, electric heaters......
Changzhou Victory Technology Co., Ltd
|
3/4HP Flat Tube Corrugated Fin Type Heat Exchanger Cross-sectional flow channel boundary area 30（m2）
|
3/4HP Flat Tube Corrugated Fin Type Heat Exchanger Cross-sectional flow channel boundary area 30(m2) Specification Finned tube type Diameter (mm) Fin specific Tube Finned O.D W*t F.P Steel-steel SRZ Φ21*2.0 Φ41 10*0.4 5.0/6.0/8.0 Steel-steel GLII Φ21*2.0 Φ......
Changzhou Aidear Refrigeration Technology Co., Ltd.
|
IEC 60601-1 304 Steel Obstruction Rectangular Cross Section
|
IEC 60601-1 304 steel Obstruction a solid vertical plane obstruction with a rectangular cross-section, 15 mm high and at least 20 mm wide that is affixed flat on the floor. The upper corners of the obstruction may have radiuses of up to 2 mm applied....
Dongguan Kingpo Technology Limited
|
310 Cold Rolled Steel Bar , Square Steel Bar Slightly Rectangular Cross Section
|
310S / 310 Cold Rolled Stainless Steel Flat Rod 12*20-25*120mm Properties Of Stainless Steel 310/310S an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000ºF. Its high chromium and nickel ......
Wuxi Sino Yuan Science And Technology Co.,Ltd.
|
A2 Corrugated Wavy Cross-section Aluminum W-core Panels For Exterior Wall Decoration. A2 Fire - Safety Classification Ensures Building Protection
|
Description In the construction and industrial fields, A2-grade aluminum corrugated sheets are in high demand because of their excellent properties. They are crafted from premium aluminum alloy thin plates. Alloys like AA1100H24 and AA3003H24 are widely ......
Jixiang Siji Industrial Co., Ltd.
|
Low Pressure Boiler Membrane Wall Cross Section Radiant Absorption
|
High Efficient Carbon Steel Boiler Membrane Wall Tube Fire / Water Tube Structure industrial plant Product Introduce Membrane water cooling wall refers to the water cooling wall composed of air-tight pipe screen welded by flat steel and pipe.The membrane ......
Zhangjiagang HuaDong Boiler Co., Ltd.
|
Small Cross Section Custom Rubber Gaskets 50050440-1 NBR Rubber Parts
|
rubber parts, molded rubber parts, rubber extrusions, 50050440-1 NBR rubber parts, rubber flat Gasket/Washer Molded rubber parts No matter the size or complexity of your job, TKS developing and manufacturing molded rubber parts more than 41 years. TKS ......
Qingdao Global Sealing-tec co., Ltd
|
Submit your “cross section flat cartridge heaters” inquiry in a minute :