DC 3G Dummy Load 50 Ohm 1000W
|
Coaxial Fixed Terminations Series 50Ω 1000w Connector 7/16 DC-3 Max VSWR1.3 400×410×147mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport ......
Shenzhen Yulongtong Electron Co., Ltd.
|
OEM High Power DC RF Dummy Load 26GHz 10W SMA Female
|
26GHz 10W SMA Female RF Dummy Load Wide band Good VSWR Good water resistance Part Number VN-DL-26G-10W-OSF Operating Frequency DC-26 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
610A DC Battery Dummy Load Bank Adjustable Resistive With Control Cabinet
|
610A,DC Variable Resistive Dummy Battery Load Banks With Control Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power ......
Shenzhen Zenithsun Electronics Tech.CO.,LTD
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male RoHS Aluminium black oxide dc...
SHENZHEN ZD TECH CO., LTD
|
DIN Female Connector DC-3.8GHz 100 Watt Dummy Load
|
...DC-3.8GHz DC-4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load......
HeFei Vinncom Science And Technology Co.,LTD
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
1000W Calibration 3G 4G N Male Connector Dummy Load/Termination Load 10W 350-6000MHz
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR......
Anhui Bonfire Technology Co., Ltd
|
200w 50 Ohm RF Resistor High Frequency Resistance Dummy Load Resistor
|
...Dummy Load Resistor product name: Electronic component passive component RF resistor 50 ohm 100 ohm 1000W flange installation terminal resistor ceramic power resistor product description: Description: RIG high power resistance is also called RIG RF resistor, RF RF resistor, high frequency RF resistor, flange RF resistor, load......
Sichuan Qixing Electronics Co., Ltd.
|
48V 200A battery test dummy load bank
|
Introduction 48V 200A battery test dummy load bank (namely battery discharger, battery load bank, battery discharge tester), is designed for the capacity test and maintenance of continuous battery sets through intensive discharging. The unit features in ......
Hebei Kaixiang Electrical Technology Co., Ltd
|
DC 6GHz N Type BNC Dummy Load Aluminum 100 Watt Dummy Load
|
100W DC-6GHz N type Coaxial Termination DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.......
Chengdu Zysen Technology Co., Ltd.
|
Submit your “dc 3g dummy load 1000w” inquiry in a minute :