DC-4GHz 500W Dummy Load / Termination Load N Female
|
DC-4GHz 500W Dummy Load /Termination Load N Female Better heating shrink Wide band Satisfying ROHS Compliance VN-LD-4G-500W-ONf-S.pdf Part Number VN-LD-4G-500W-ONf-S Operating Frequency ( MHz ) DC-4000 Impedance ( Ohm ) 50 VSWR ≤1.30 Application Indoor ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
N Male VSWR1.20 4GHz RF Dummy Load
|
...4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load...
HeFei Vinncom Science And Technology Co.,LTD
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male RoHS Aluminium black oxide dc...
SHENZHEN ZD TECH CO., LTD
|
ODM 100W DC 4GHz RF Termination 50 Ohm 6.35*6.5mm
|
...DC- 4GHz BeO AlN Al2O3 6.35 * 6.5 1. We supply various electronic components and welcome your inquiry 2. Recovery of electronic components 3. Sincerely look forward to your cooperation! Flange Termination 100watt 50ohm RF Termination Microwave Resistor High Power Dummy Load Used and refurbished 100% DC Resistance Check Tested MILITARY/INSTRUMENTATION RESISTIVE COMPONENTS Features: • DC......
Shenzhen Yulongtong Electron Co., Ltd.
|
DC-6000MHz 50W 25W RF Dummy Load Termination Load 4.3-10-M for Das Ibs 4.3-10-M Dummy
|
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications Frequency Range(MHz) DC-6000 VSWR ≤......
Anhui Bonfire Technology Co., Ltd
|
0.5 Watts DC - 40GHz RF Termination Load K2.92mm Male Chip Resistor
|
RF Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load...
Xi'an Elite Electronic Industry Co., Ltd.
|
F Male Terminator, RF Dummy Load
|
F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ......
Changzhou H .N . Electronic Co., Ltd.,
|
Aluminum Material Silver Plated Waveguide Parts Matched Rf Dummy Load
|
Waveguide Aluminum Material Silver-plated Matched Load Components Quick Details Place of Origin:Sichuan, China Brand Name:sinoscite, Microwave Material:Aluminum material, silver-plating Applications:Microwave test Characteristic:Compact, full bandwidth, ......
Chengdu SinoScite Technology Co., Ltd.
|
N Male Cu RF Load Termination 2.92mm 50 Watt Dummy Load
|
50W DC-18GHz N connector Coaxial Termination DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.92mm or chip, ......
Chengdu Zysen Technology Co., Ltd.
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
Submit your “dc 4ghz rf dummy load” inquiry in a minute :