Home > Chemicals > Catalysts & Chemical Auxiliary Agents > Chemical Auxiliary Agent >

Demoulding Rubber Release Agent

1-10 Results for

demoulding rubber release agent

from 523 Products

Calcium Stearate Emulsion Rubber Release Agent

...Rubber Release Agent for Rubber Product Demolding Product Description: This product is a water-based calcium stearate suspension prepared via a proprietary process. As an outstanding anti-adhesive agent, release agent, and anti-sticking solution, it is ideally suited for rubber and plastic products. This is the LSC - 500 non - ionic calcium stearate white emulsion rubber release agent. As a specialized release agent...

WUXI LANSEN CHEMICALS CO.,LTD.

Address: Room 1502, No. 21, Education West Road, Yicheng Street, Yixing City, Wuxi, Jiangsu, China

The Ultimate Water-Based Silicone Rubber Release Agent

...Rubber Release Agent Product Description Lubekote 9700S is an advanced, water-based release agent system engineered specifically for challenging rubber molding operations. While exceptionally effective as a silicone rubber release agent, its superior formula is also designed for a wide range of elastomers, including Natural Rubber, EPDM, Acrylic Ester, Vinyl Acrylate rubber, and notoriously difficult-to-release...

Shanghai Lorechem Company Limited

Address: Floor 2-3, Building 20, Hongxing International Plaza, Lane 1818, Lianhang Road, Pujiang, Shanghai

High Quality Demoulding Effect Rust Prevention No Damage Mould Release Agent

Product Description for High Quality Demoulding Effect Rust Prevention No Damage Mould Release Agent Description Details Product Name No Damage Mould Release Agent Formulation Formulated with silicone to provide rapid dry and anti-stick properties Ease of ......

Plyfit Industries China, Inc.

Address: Room2203, 19th floor, Jinhua Building, Longfeng 3rd road,Longhua new district,Shenzhen,Guangdong China

Resin Mould Release Agent Fast Curing For Lubrication Electrical Insulator

Release agent for lubrication on electrical insulator molds PRODUCT MSDS: 1. IDENTIFICATION Commodity name: JT6101A demoulding agent Company Name: HUBEI JIANGTE INSULATION COMPOSITE CO., LTD. Add: Room219 Zhanghua Road(N), EDA Qianjiang City, Hubei ......

JIANGTE INSULATION COMPOSITE

Address: RM1204, Greenland Center of Financial City, No.662 Huangpu M Avenue, Tianhe District, Guangzhou, China.

Water Base Mould Release Agent Shoe Sole molding release agent

.... Mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin. Process: It can be used in the Polyurethane and rubber field. It should be diluted into 20-25 time for the shoe sole production....

JOYWAY INDUSTRIAL COMPANY LIMITED

Address: 904, Block A, China Europe International Building, Zhangdian District, Zibo City, Shandong Province

PU Elastomer Release Agent Polyurethane Additives

...Release Agent 1. DESCRIPTION This product is a kind of modified silicone mainly use for PU products,high-grade parting agent. Which has several excellence character,smooth,isolation,high and low temperature resistance,no corrosivity for mould. 2. SPECIFICATION ITEMS SPECIFICATIONS Appearance Light yellow transparent liquid Viscosity(25°Cmpa.s) 500-1500 PH Value 0.965-0.975g/cm3 Demoulding......

Qingdao Exceed Fine Chemicals Co.,Ltd

Address: No.166, Zhengyang Middle Road, Chengyang District, Qingdao City, Shandong Province, China. 266000

Casting Graphite Casting Mould Releasing Agent Release Graphite A Powder

... Mould Releasing Agent Release Graphite A Powder Mould Releasing Agent A release agent is an interface coating used on two surfaces that tend to stick to each other to make the surface easy to release, smooth and clean. Mold release agents are used in ......

Qingdao Hensen Graphite Co., Ltd.

Address: Wangcheng Industrial Park, Laixi, Qingdao

Release Agent Surfactant Stearic Acid CAS 57-11-4 FEMA 3035 Rubber Vulcanization Accelerator Waterproofing Agent

Release Agent Surfactant Stearic Acid CAS 57-11-4 FEMA 3035 Rubber Vulcanization Accelerator Waterproofing Agent Introduction: Stearic acid, legal number INS (internationalnumbersystem) 570, EECNo.570, CAS [57-11-4], is a white or yellowish-white ......

Senzhuo Industry Co.,Ltd

Address: 4TH FLOOR,BUILDING3,ZHONGRUN CENTURY CENTER , NO.12111 JINGSHI ROAD,,JINAN CITY,SHANDONG PROVINCE, CHINA. PC.250013

Tansformers CT PT Casting Mold Mould Release Agent CE

..., may cause lung injury,when the fire (such as cigrette)fuel burning goods heated over 250 degrees Celsius, will release potentially harmful smoke. Therefore, do no somke before spraying and wash your hards before spraying. Whether this material is...

Shanghai Wenyou Industry Co., Ltd.

Address: No.8,Lane 328, Minle Rd. Fengxian 201419,Shanghai P.R.China

Shin-Etsu KM-740T Rubber Resin Release Agent Silicone Emulsion

Shin-Etsu KM-740T Rubber Resin Release Agent Silicone Emulsion Product Properties Property Value Appearance Creamy white emulsion Non-volatile content 39% (at 105℃×3h) Base fluid viscosity 350 mm²/s (25℃) Ionic character Nonionic pH value N/A (Not ......

Shenzhen Huazhisheng New Material Technology Co., Ltd.

Address: 101, No. 130 Fengping Road, Shitouling Industrial Zone, Wulian Village, Fenggang Town, Dongguan City, Guangdong Province, China

Submit your “demoulding rubber release agent” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Shenzhen Huazhisheng New Material Technology Co., Ltd. Products: Shin-Etsu KM-740T Rubber Resin Release Agent Silicone Emulsion
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “demoulding rubber release agent” inquiry

*From:
Your email address is incorrect!
To: WUXI LANSEN CHEMICALS CO.,LTD.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0