Home > Electrical Equipment & Supplies > Low Voltage Products > Surge Protection Device >

Din Rail 35mm Surge Protective Device

1-10 Results for

din rail 35mm surge protective device

from 74 Products

IP20 Din Rail 80KA Surge Protection Device SPD Type 1+2

Din rail 80KA Surge Protection device Type 1+2 with lightning protection class 3+4 Technical Parameters Model: Maximum continuous voltage AC Uc V 275/320/385/440 SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 class I+II Lightning impulse current (10/350µs) Iimp kA 15-25 Nominal discharge current (8/20µs) In kA 40-80 Maximum discharge current (8/20µs) Imax kA 80-160 Voltage protection......

Guangdong Uchi Electronics Co.,Ltd

Address: Room 810, Unit 2, Building 5, Huixing Commercial Center, Dongsheng Road No.1, Zhongshan Dong, Shilong Town Dongguan, GUANGDONG, 523326 CN

IP20 Din Rail 80KA Surge Protection Device SPD Type 1+2

Guangdong Uchi Technology Co.,Ltd

Address: Floor 4, NO.25-29,Power Station Road, Xihu , Shilong Town , Dongguan 523325, China.

Britec Surge Protective Device Type 3 BR -10DP Series 35mm Lightning Protection Device

...: 2P. • For DIN rail installation, with remote contact signaling intervention. • The type 3 SPD has Uoc of 10kV. • Conforms to IEC61643-11 and EN61643-11. • Green-......

Britec Electric Co., Ltd.

Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600

Power surge protection device low voltage arrester surge protector 220v

...surge protection device can be produced on request Product Installation With 35mm standard DIN-rail mounting, connecting copper stranded conductor is 2.5~35mm² At front of spd each pole must be setted protection---used fuse or miniature circuit breaker lightning current SPD protection,after SPD breakdown to short circuit protection. SPD install on protected......

Zhejiang THOR Electric Co., Ltd

Address: China Zhejiang Wenzhou Economic Development Zone

Yellow 20ka 3 Phase AC Surge Protective Device 385V For Lighting Protection

...Low-voltage Surge Protective Devices-Part 1: Surge Protective Devices Performance Requirements and Test Method of Low-voltage Power Distribution System. With good sealing, it is designed as module and 35mm din-rail mounting. With working indication window,...

Hunan Heou Engineering Consulting Co., Ltd

Address: 618, Goodbond Venture Base, No.18, Lu Yun Road, Yue Lu District, Changsha City, Hunan Province

Network Surge Protection Device Single Port 10/100/1000Mbps Din Rail

...Din Rail Network Surge Protection Device Technical Parameters Interface Form RJ45 Rated operating voltage Un 5V MAX Continuous running voltage Uc 8V Nominal discharge current In(8/20) 5KA Maximum discharge current Imax(8/20) 10KA limiting voltage Up 20V Network signal transmission rate Vs 10/100/1000Mbps self-adaption Network signal protection......

Shenzhen Qiutian Technology Co., Ltd

Address: 2F 7B Nangang First Industrial Park Songbai Road Xili Town, Nanshan District, Shenzhen City Guangdong China

Standard Rail 35mm 3P AC275V SPD Surge Protective Device

... supply system of AC 50/60Hz,<380V, installed on the joint of LPZ1 or LPZ2 and LPZ3. It's designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device, When the...

YUEQING FEEO ELECTRIC CO.,LTD

Address: Keaisi Road, Xiangyang Industrial zone , Yueqing, Zhejiang,China.

HKSPD1 Control And Protective Switching Device Surge Protection Device 1P

... installations. It is designed according to ICE61643-1 and GB18802.1 standards, installed on DIN rail EN 60715 (35mm) by means of fast clip device. It is built in with failure interrupter device, will automatically interrupt when breakdown fails due to...

Yueqing Vorax Electric CO.,LTD

Address: Liuhuang Road, Liushi Town, Yueqing City, Zhejiang Province

LPEP 385/20M Series Surge Protective Device with 385V Max Continuous Voltage 35mm Rail Mounting and Up≤1.8kV Protection Level

The LPEP 385/20M Series Surge Protective Device The LPEP 385/20M T2 Series Surge Protective Device is designed for overvoltage/surge protection in power secondary systems, including distribution cabinets, feeder panels, control/monitoring panels, UPS ......

Guangzhou GENY Electric Co., Ltd

Address: ROOM 107, 1ST FLOOR, No. 602 GUANGSHAN ER ROAD, TIANHE DISTRICT, GUANGZHOU, CHINA POSTCODE: 510663

Industrial Network Switch Gigabit Fiber Din Rail 6KV Surge IP40 Fanless Unmanaged

...surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant DIN rail or Wall installation...

Shenzhen Olycom Technology Co., Ltd.

Address: 4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China

Submit your “din rail 35mm surge protective device” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Shenzhen Olycom Technology Co., Ltd. Products: Industrial Network Switch Gigabit Fiber Din Rail 6KV Surge IP40 Fanless Unmanaged
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “din rail 35mm surge protective device” inquiry

*From:
Your email address is incorrect!
To: Guangdong Uchi Electronics Co.,Ltd
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0