High Pressure Cryogenic Gate Valve Carbon Steel LF2 2 Inch DN50 1500LB Welded Flanged Gate Valve Solid Wedge Gate Valve
|
... Steel A350 LF2 Seal material Gasket Feature Easy disassembly and assembly General Introduction VERVO forged steel valve has the advantages of small volume and...
ZHEJIANG VERVO VALVE CO.,LTD
|
Mining Industry DN50 Manual / Pneumatic Actuator Knife Gate Valve
|
...gate valve,lug type/wafer type Technical Data Sizes: DN 50 to DN 600 (larger diameters on request) Seat Material: Resiliant: PTFE/EPDM/NBR Metal: Tungsten Carbide/Satellite/304/316 Pressure: 1. Lug water knife gate valve:DN50-DN600 Pressure rating:DIN PN10,PN16,ANSI 150 2. Wafer thtough conduit knife gate valve:DN50......
COOSAI valve group
|
DN50 Cast Iron Knife Gate Valve ANSI 150LB Non Rising Stem Wafer Gate Valve
|
..., the ram of the motion direction and perpendicular to the direction of flow on the blade shape ram can cut fiber cutting medium, sealing face has two gate, two of the most commonly used mode gate valve sealing surface form a...
TOBO STEEL GROUP CHINA
|
DN50 - 1600 mm Electric / Manual Flanged Gate Valve /Sluice Valve For Hydropower Project
|
...full close to block fluid in the pipeline. The gate is usually wedge shaped. When the valve is wide open, the gate is fully drawn up into the valve, leaving an opening for flow through the valve the same size as the pipe in which the valve is installed....
Hangzhou Hydrotu Engineering Co.,Ltd.
|
High Performance DN50 - DN600, PN10 / 16 / ANSI 125, GG25 / GGG40 Fire Gate valve
|
|
High Performance DN50 - DN600, PN10 / 16 / ANSI 125, GG25 / GGG40 Fire Gate valve Size:Dn50-DN600 Pressure:PN10/16/ANSI 125 Insepction:API598 Flanges:Ansi b16.5 Bs4504 En 1092 Size:Dn50-DN600 Pressure:PN10/16 Temperature:0-80℃ Material:GG25/GGG40...
Shenzhen Chongxi Precision Metal Products Co., Ltd
|
A105 Flange End ANSI Gate Valve , DN50 Rising Stem Gate Valve
|
...DN50 Flanged Gate Valve Introduction The opening and closing part of the forged steel gate valve is the gate, and the movement direction of the gate is perpendicular to the fluid direction. The forged steel gate valve can only be fully opened and closed, not adjusted and throttled. The gate of forged steel gate valve......
China • Yuanda Valve Group Co., Ltd.
|
Stainless Steel Pneumatic Knife Gate Valve DN50-1000mm Used In Papermaking Petrochemical Mining Drainage
|
... knife gate valve and a pneumatic actuator. The bottom of the gate is a knife-shaped oblique cut, which has a good shearing effect, so that the valve is not blocked by the medium when it is closed, and can scrape off the adhesive on the sealing surface and...
Handan Shengnada New Material Technology Co., Ltd.
|
Ductile Iron Soft Seated Gate valve Flange End DN50-DN800
|
...Gate Valve Flange End DN50-DN800 1.PRODUCT PROFILE Soft seated gate valves, in ductile iron with flat body and EPDM covered wedge.Traditional gate valves often have water leakage and corrosion. In order to overcome this shortcoming, the soft seated gate valve appeared. As an updated product of the traditional gate valve, the soft seated gate valve......
Anhui Prosper Flow Technology Co., Ltd
|
DN50 PN10 No Rise Stem Manual Gate Valve Ductile Iron Cast Steel Stainless Steel For Water Conservancy
|
DN50 PN10 Ductile Iron Cast Steel Stainless Steel No Rise Stem Manual Gate Valve For Water Conservancy Product Introduction The gate valve is a kind of valve that opens and closes through the ram, and its working principle is based on the function of the ram moving vertically along the axis of the valve seat to achieve the function of full opening or closing, and cannot be used for regulation and throttling. Gate valve......
Henan Lianghe Pipeline Equipment Co.,Ltd
|
DN50-DN400 Gate Valve with Rising Stem Strength Sealing Test Port Size DN50-DN400
|
...gate valve is rated at a Nominal Pressure (PN) of 1.6 MPa, ensuring optimal performance under moderate pressure conditions. Whether used in water supply systems, oil and gas pipelines, or other industrial settings, this gate valve delivers consistent and efficient flow control. Operating within a working temperature of up to 80°C, this gate valve......
Shanghai Jianggong Valve Manufacturing Co., Ltd.
|
Submit your “dn50 gate valves” inquiry in a minute :