DX8890 Aircraft Seat Pad Oil Combustion Test Device
|
DX8890 Aircraft Seat Pad Oil Combustion Test Device 1. Comply with standards: It is a new type of testing equipment researched and developed according to the technical conditions specified in the test standard of the national standard "AC-25-01R2 Civil Aviation Regulations of China, Part 25, Appendix F Flammability of Seat Cushions". The purpose of this test......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
NFPA 1971-2007 Fire Helmet Fire Resistance Combustion Test Device
|
... test principle is that under the action of thermal radiation, open fire impacts on various components of fire helmet, and then detects its flame-retardant performance. ......
SKYLINE INSTRUMENTS CO.,LTD
|
A Fire-Retardant Wood Combustion Test Device For The Wood Stack Method
|
Scope of application It is applicable to the inspection of the combustion quality loss rate and flame burning time of various actual used woods in production and engineering with a thickness of more than 20mm after flame-retardant impregnation treatment......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
Flammability Test Of Thermal Combustion Oil Test Device PLC Control IEC 62368-1
|
... combustion oil test device is designed and manufactured according to the standard requirements of IEC 62368-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is ......
Sinuo Testing Equipment Co. , Limited
|
IEC60950-1 Combustion Safety Test Apparatus Hot Flaming Oil Test Device
|
... and IEC60950-1:2013 clause 4.6.2, Annex A.3. Equipment Structure The Hot Flaming Oil Test Device is a specialized fire safety testing system designed to evaluate the flammability and fire protection performance of electrical and electronic equipment. It...
Sinuo Testing Equipment Co. , Limited
|
UL1581 UL 2556 VW-1 Flame Test Equipment Wire Cable Horizontal Vertical Combustion Test Equipment
|
...Combustion Test Device VW-1 Flame Tester Product Description: The VW-1 combustion test machine is manufactured strictly in accordance with UL standards, fully in line with VW-1 combustion test standards, and can complete VW-1 and FT-2 tests. It is economical and widely used in the wire and cable industry. The parameters are as follows: The entire test......
Chongqing gold mechnical and electrical equipment Co., Ltd
|
ISO 9705 ZY6264 10MW Combustion Testing Equipment Heat Release Rate Test Device
|
... and components) and extensive fire resistance test verification for raw materials, buildings and physical models. Experimental principle: The most basic physical quantity of a large calorimeter is the heat release ......
Dongguan HOOHA Electrical Equipment Company Limited
|
Single Cable Vertical Burning Test Device
|
...Test Device Standard: IEC 60950-1,BS EN 60950-1,BS 7002, UL746A,IEC60947.1, IEC730.1. Application:Suitable for vertical burning test of single cable or optical cable products, determine the combustion characteristics of insulating materials. Test sample:Single cable or optical cable products. Feature:Using integral intake automatic ignition system, combustion time delay only 0.1s to ensure that the full combustion...
shanghai kerang technology co ltd
|
Flame Temperature Calibration Device 500W / Flame Temperature of Combustion Test Equipment
|
...combustion test equipment. Calibration Procedure Position the copper block 55±1mm above the needle flame burner. Ignite the flame; the time for the copper ......
Hai Da Labtester
|
ISO1716 Building Material Heat Combustion Testing Equipment ISO1716 Apparatus
|
...Combustion Testing Equipment ISO1716 Apparatus Introduction: Gross heat of combustion of materials is an important parameters to evaluate building materials heat release and fire base data; ISO1716 Bomb Calorimeter is the most common device for measuring the heat of combustion......
Delta Technology (Chongqing) Co., Ltd.
|