E26 Go And Not Go Gauges , Mold steel Screw Thread Gauge
|
...29L-4 “NOT GO” GAUGE FOR CAPS E26, E26/50x39, E26/51x39 & E26d 7006-29-3 GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS 7006-29A-2 GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E26d 7006-29B-2 GAUGE WITH...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60061-3 7006-27D-3 E26, E26/50*39, E26/51*39 & E26d "GO" Gauge for Caps
|
... on finished lamps. Testing: When the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall touch surface X. When the lamp is removed from the gauge, at least two full turns shall be required to disengage the...
HK LEE HING INDUSTRY CO., LIMITED
|
E26 Lamp cap gauge | go gauges for caps E26-7006-27D-3
|
E26 Lamp cap gauge | go gauges for caps E26-7006-27D-3 “GO” GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS E26, E26/50x39, E26/51x39 & E26d Dimensions in millimetres - Dimensions en millimètres The drawing is intended only to illustrate the essential dimensions of the gauge. Le dessin a pour seul but d’illustrer les dimensions essentielles du calibre. For details of caps E26, E26/50x39, E26......
KingPo Technology Development Limited
|
Digital Torque Meter Lamp Cap Gauge With E27/E26 G5/G13 Torque Gauges / Clamps
|
...test postive and negative toruqe of the lampcap, the test range is from 0 to 10N.m. The digital torque meter equips with E27/E26, B22d, E14/E12, G5/G13 clamps and torque gauges, the upper limit can be preset to alarm, it is a simple and effective meter for...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60061-3 E14 E26 E27 E39 E40 Lampholders Go Not Go Gauge Confirm The Dimensions Of Socket
|
... Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2. These lampholder gauges are used to check whether the dimensions and shapes of the lampholders meet standard requirements by...
Sinuo Testing Equipment Co. , Limited
|
Durable Flame-Retardant Plug Adapter Cable with E26 Light Bulb Socket and Inline Dimmer Switch, NEMA 1-15P to E26 Converter
|
...E26 Light Bulb Socket and Inline Dimmer Switch, NEMA 1-15P to E26 Converter Product Description Name us 2pin plug to E26 light socket with dimmer switch Lamp sockets E12, E14, E27, B22 are optional Switch 303/304 on/off, gear, dimmer, foot switch optional Bare 100%copper Color Black/ White Cable Gauge......
Shenzhen Kuncan Electronics Co., Ltd.
|
10A / 125V Lamp Power Cord / Ul Listed Salt Lamp Cord With Dimmer 20W Bulb Black Color
|
... by U.L Description Salt Lamp Cord with Dimmer Switch 1st Connector USA 2 pin plug 2nd Connector E14/ E12/ E26/E27/ B22 socket Bulb 10W / 15W/ 20W/25W Cord Type SPT-2 18AWG Wire Gauge 18AWG Cable Length (M) 1.8M/3M or OEM Sample Supported...
Ningbo Aurich Electronics Co.,Ltd.
|
Submit your “e26 go and not go gauges” inquiry in a minute :