Touch Screen 14mm/S Electrical Hot Wire Tester
|
...Hot wire tester Scope of application The heating wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550℃~960℃) 1 min, then sets the pressure (0.95±0.1 N)30 s of vertical burning samples. To determine the ignition risk of electrical......
Beijing Jinshengxin Testing Machine Co., Ltd.
|
GWT IEC60695 Electrical Parts Plastic Material Glow Wire Tester
|
...overload conditions. Glow wire testing simulates thermal stress caused by glowing elements or overloaded resistors in a short time, to evaluate the risk of fire. The glow wire test applies to electrical and electronic products, household appliance parts,...
Delta Technology (Chongqing) Co., Ltd.
|
110-220V 60Hz Electric Hot Wire Cutter Hand Pull Type
|
RONGTER Customized Top Quality Hand-Pull Type Hot Wire Cutting Machine Fast heating, adequate power to maintain high temperature. Uses: Cuts Polystyrene, Pink Foam, Styrofoam With Ease. Custom Shape and Design Foam for Hundreds of Uses. HOW TO: Heats Up ......
Rongter Suzhou Mechanical & Electrical Co., Ltd.
|
Household Appliance Materials Hot Wire Ignition Independent Exhaust Tester With Electrical Control
|
...requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors....
Guangzhou HongCe Equipment Co., Ltd.
|
PLC Type Glow Wire Tester According To IEC60695-2-10 To IEC60695-2-13
|
...plastic materials used in electrical devices. Its purpose is to protect against the risk of fire from overheated or electrically energised parts which may cause the plastic material to ignite. This may occur in normal use, under reasonable abnormal use,...
Pego Electronics (Yi Chun) Company Limited
|
Plastic Testing Equipment Digital Portable Density Meter For Plastic And Rubber,Plastic Raw Material Density Tester
|
Plastic Raw Material Density Tester Suitable for: Rubber, Plastic, Electric wire, Hard alloy, New materials research lab Principle: Plastic Raw Material Density Tester In accordance with GB/T 533, T1033, ISO 2781, 1183, DIN 53479, ASTM D 297, D792, standards, and by adopting the buoyancy method of Archimedean principle, the machine can accurately and directly show the density of sample. Technical data: A. There are many ways for plastic...
Dongguan Liyi Environmental Technology Co., Ltd.
|
Height 60mm Hot Wire Ignition Tester 250mm Anneal Holder Distance
|
... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The...
Dongguan Kingpo Technology Limited
|
IEC60695-2-20 Hot Wire Ignition Tester Flammability Testing Equipment
|
...Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot Wire Ignition Tester 5.28Ω/M
|
...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Fire Hazard Glowing Hot Wire Testing Machine IEC60695-2-10
|
Electrical strength test machine for solid insulating materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media at power frequency voltage. Standards: GB/T5169.10,GB/T5169.13-2006 IEC60695-2-10:Fire hazard testing- Part2-10: Glowing/hot wire testing Machine- Glow-wire......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Submit your “engineering plastics electrical hot wire tester” inquiry in a minute :