45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment IEC60695
|
... degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. Needle flame ......
Pego Electronics (Yi Chun) Company Limited
|
Fire Resistance Flammability Testing Equipment With 220V 50Hz Power
|
UL 224 Standard Fire Resistance Tester For Extruded Insulation Tubing Testing Application: This instrument is used to test flammability performance of insulating tubing by using a tirrill gas burner in a specified metal chamber. Technical Parameters: 1.......
Dongguan Hust Tony Instruments Co.,Ltd.
|
IEC 60950 Fire Hazard Glow Wire Flammability Testing Equipment
|
...Fire Hazard Glow-wire Flammability Testing Equipment Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products; IEC60695-2-12 Fire hazard testing – Part 2-12: Glowing/hot-wire based test......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Flammability Testing Equipment Horizontal Vertical Flame Tester For Fire Hazard Testing
|
Flammability Testing Equipment Horizontal Vertical Flame Tester for Fire Hazard Testing Standard: UL94 Test for Flammability of Plastic Materials for Parts in Devices and Appliances; IEC 60695-11-2 Fire hazard testing - Part 1 1 -2: Test f1 ames - 1 kW nominal pre-mixed flame - Apparatus , confirmatory test arrangement and guidance; IEC 60695-11-3 Fire hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test...
Guangzhou HongCe Equipment Co., Ltd.
|
UL94 Horizontal And Vertical Flammability Testing Equipment 500W 50W
|
...Flammability Testing Equipment 500W 50W Complied Standards & Clauses IEC 60695-11-10 “Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods” IEC 60695-11-20 “Fire hazard testing - Part 11-20: Test flames - 500 W flame test method” IEC 60695-11-4 “Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method” UL 94 “Tests......
Sinuo Testing Equipment Co. , Limited
|
Needle Flammability Test Equipment
|
...Flammability Test Equipment Needle Flame Tester Product Introduction The test machine is designed and manufactured according to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is applicable to the measurement of the fire hazard......
Dongguan Kingpo Technology Limited
|
IEC60695 Flammability Testing Equipment
|
...Flammability Testing Equipment Application: Insulation and combustible materials used inside electrical and electronic products may propagate flames when a failed component ignites, which may develop into a fire that endangers the safety of operators and product operation. The Needle Flame Tester is used to assess the fire hazard of such component materials. The test is performed to determine that the test......
Guangzhou Shice Equipment Co., Ltd.
|
Glow Wire Tester Flammability Testing Equipment
|
...Flammability Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test......
Shanghai Glomro Industrial Co., Ltd.
|
0.5 Cube Stainless Steel Needle Flame Test Chamber Combustible Materials Flammability Testing Equipment
|
... result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test may be used as elements of a fire hazard assessment which takes into account all of the factors which are pertinent to an assessment of...
Sinuo Testing Equipment Co. , Limited
|
ASTM D 635 Plastic Horizontal Flammability Testing Equipment Burning Rate Tester
|
... IEC60695-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. The horizontal and vertical flame test apparatus is applied to the V-0, V-1, V-2, HB and 5V materials, it is widely used in...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Submit your “fire hazard flammability testing equipment” inquiry in a minute :