45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment IEC60695
|
... degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. Needle ......
Pego Electronics (Yi Chun) Company Limited
|
ISO 10497 Fire Resistance Test Equipment For Valve Hose Pipes by ISO 19921&19922
|
Fire Resistance Test Equpiment for Valve, Hose & Pipes Introduction: This fire resistance test equipment complies with the following standards: • Valve Fire Test (ISO 10497) • Fire Test hoses (ISO 19921 & 19922) • Plastic Pipe Fire Test (FTP II Res A 753) In the case of internal pressure, valves using a burner simulation of fire, for marine and similar joints of pipe and fire resistance test......
Advanced Instruments Co.,Limited
|
Vertical Drip Box Waterproof Testing Machine Ingress Protection Test Equipment IEC60529 IPX12
|
...Testing Machine - Ingress Protection Test Equipment - IEC60529 IPX12 Standard:IEC60529 degree of protection provided by enclosures (IP Code) of the IPX1 and IPX2, IEC60884-1, IEC60335-1, IEC60598-1. Application:It is used for the testing of IPX1 and IPX2. Ingress Protection Test Equipment Test sample:The test......
Guangzhou HongCe Equipment Co., Ltd.
|
Fire Resistance Test Equipment , Wire Testing Equipment IEC 60331 For Line / Cable
|
...Fire Resistance Testing Equipment Introduction: Fire Resistance Tester is used in test conditions where the basic flame temperature is at least 750ºC and tests the cable exposed to the flame that needs to maintain the circuit integrity. Standard: IEC 60331 - Test for electric cables under fir conditions - Circuit integrity IEC 60331 Part 11 - Apparatus - Fire......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
220V Fire Alarm Testing Equipment , 0.3kw Fire Extinguisher Testing Equipment
|
...Fire Alarm Testing Equipment , 0.3kw Fire Extinguisher Testing Equipment Scope of application: 1. Impact test for different capacity fire extinguishers. 2. Adopt the method of comparison with standard pressure gauge. Meet the standard: 1. Standard GB4351-2005 "portable fire......
Dongguan HOOHA Electrical Equipment Company Limited
|
Fire Resistance Testing Equipment for Non-Flammable Building Materials
|
... the standards: GB/T5464-2010 "Test method for incombustibility of building materials", IS01182:2002 "Inflammability test of building materials against fire test" Main parameters: Test equipment includes heating furnace, sample holder,...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
BS 8414 Fire Resistance Test Equipment for External Cladding Systems
|
...Fire Resistance Test Equipment For External Cladding Systems Brief Introduction: The BS 8414 Fire Resistance Test Equipment For External Cladding System is mainly used for testing the fire resistance performance of external wall insulation systems in buildings. BS 8414 Fire Resistance Test Equipment For External Cladding Systems is suitable for testing......
Delta Technology (Chongqing) Co., Ltd.
|
UL 2580 EV Battery Testing Equipment External Fire Exposure Testing Equipment
|
... Fire Exposure Testing Equipment Complied Standards & Clauses The Battery Pack External Fire Exposure Testing Equipment matches the requirements of UL 2580 clause 42, ECE R100 Annex 8E, etc. Technical Parameters Product number SN5516-2500 SN5516-3000 Test ......
Sinuo Testing Equipment Co. , Limited
|
ISO 20653 IP Ingress Protection Test Equipment Single Phase AC220V 50Hz
|
...Protection Test Equipment ISO 20653 IP Testing Equipment ISO20653 IP Testing Equipment Ingress Protection (IP) Testing Performance Testing against Water and Dust Ingress Ingress Protection (IP) testing to IEC standard 60529, NEMA 250 testing, and UL 50E testing. Both UL testing and IP testing are typically performed on enclosures to determine the level of protection they provide against water, dust, ice, etc. Ingress Protection...
KingPo Technology Development Limited
|
100L Ingress Protection Test Equipment Ice Water Shock Submersion
|
... Standard The Ice Water Shock Submersion Test Equipment is designed and produced as the standard of the ISO 16750-4:2010 5.4.3. Test method Connect the DUT to the test equipment. Operate the DUT in a hot air oven TMAX for the specified holding time,t h...
Dongguan Kingpo Technology Limited
|
Submit your “fire protection testing equipment” inquiry in a minute :