DC 40GHz 5W Fixed Microwave Attenuator Low Standing Wave
|
DC-40GHz 5W 2.92mm Male-2.92mm Female 1-40dB Attenuator Wide band Good VSWR Attenuation Range Wide Part Number VN-AT-40G-5W-2.92mm Operating Frequency DC-40 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
N Type Female Connector Fixed Coaxial Attenuators 4GHz 20dB 200 Watts
|
...Fixed Coaxial Attenuators Zysen's 200W attenuators available with DC-3GHz, DC-6GHz, DC-12.4GHz, DC-18GHz, 50 impedance & SMA, N Female/Male connectors. Available with 6, 10, 20 , 30dB&40dB to 50dB, 60dB attenutation. Electrical Specifications Frequency Range DC – 4GHz Power 200W CW @ 25ºC Attenuation 10~20dB 30~40dB 50~60dB Attenuation......
Chengdu Zysen Technology Co., Ltd.
|
100 W Coaxial Fixed Fixed RF Attenuator DC26.5 GHz 2.92 mm Attenuator
|
...Fixed Attenuators DC-26.5 GHz Connector 2.92 mm Description The coaxial fixed attenuator is suitable for any need to reduce the power level or circuit matching, can quantitatively absorb the energy in the transmission line, extend the power range, control the power level, and can be configured with a small power meter, comprehensive tester or spectrum analyzer to accurately measure the power or spectrum of various RF microwave...
Nanjing Shinewave Technology Co., Ltd.
|
VSWR 1.2 1.3 1.25 Coaxial Fixed 10w Attenuator DC 12.4GHz 6GHz 18GHz 21x71mm
|
... range and controlling power level, also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer. Model Power Rating(W) Frequency(GHz) Max VSWR Attenuation (dB)...
Shenzhen Yulongtong Electron Co., Ltd.
|
Digitally Controlled 10W RF Coaxial Attenuator , Fixed Coaxial Attenuator 50 Ohm
|
...RF Coaxial fixed Attenuators Coaxial fixed attenuators are used in absorbing energy of transmission line, expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF microwave transmitters accompany......
SHENZHEN ZD TECH CO., LTD
|
1dB 20dB SC Fixed Metal Attenuator SM APC UPC Male To Female
|
...Attenuator Product Name: 1 to 20 dB SC Fixed SM APC and UPC Male To Female Metal Fiber Optic Attenuator Fiber Optic Attenuator Description: An SC fixed male to female attenuator is a passive device used to reduce the intensity of optical signal without significantly changing the transmission wavelength. It is a male-to-female connector and fixed-type attenuator. the attenuation......
TAKFLY COMMUNICATIONS CO., LTD.
|
Telecommunications Fixed Optical Attenuator FC UPC Single Mode Fiber Optic Attenuator
|
...,LC,FC,ST,MU Optional Mode: Singlemode, Multimode Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm Description: Attenuators are also used to balance out transmission lines that otherwise would have unequal signal levels. Features: Complied with...
TTI Fiber Communication Tech. Co., Ltd.
|
Single Mode FC APC 1550nm 25dB Fixed Optical Attenuator
|
... attenuation values are available in 1dB increments from 1 to 20dB. This Fixed Optic Attenuator 10 dB (Low Polarization FC APC) is a passive device mainly used to reduce the amplitude of a light signal without any significant ......
Wuhan Geehe Optical Communication Co.,ltd
|
SC FC Fixed Optical Attenuator Low PDL FTTX Network Telecommunciation
|
...Fixed Optical Attenuator Low PDL FTTX Network Telecommunciation Product introduction Attenuator optic attenuator is a precise device that can provide different attenuation for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation......
COMELINK CO.,LTD
|
Plastic Single Mode Fiber Optic Attenuator 12dB LC APC UPC Fixed Optical Attenuator
|
...Fixed Optical Attenuator Single Mode Fiber Optic Attenuator Product Introduction of Fiber Optic Attenuator: Fiber optic attenuators are devices that reduce (attenuate) the strength of a fiber optic signal within a fiber-optic network. Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. Sometimes attenuators......
Shenzhen Begate Technology Co.,Ltd.
|
Submit your “fixed microwave attenuator” inquiry in a minute :