A105 Flange End ANSI Gate Valve , DN50 Rising Stem Gate Valve
|
...Flange End Rising Stem DN15~DN50 Flanged Gate Valve Introduction The opening and closing part of the forged steel gate valve is the gate, and the movement direction of the gate is perpendicular to the fluid direction. The forged steel gate valve can only be fully opened and closed, not adjusted and throttled. The gate of forged steel gate valve......
China • Yuanda Valve Group Co., Ltd.
|
CF8 1.6MPa 2 Inch Stainless Steel Gate Valve , Class 150 Flange End Manual Gate Valve
|
...Flange End Stainless Steel Manual Gate Valve What is Gate Valve? A gate valve can be defined as a type of valve that used a gate or wedge type disk and the disk moves perpendicular to flow to start or stop the fluid flow in piping. A gate valve is the most common type of valve used in any process plant. It is a linear motion valve used to start or stop fluid flow. In service, these valves......
TOBO STEEL GROUP CHINA
|
Smooth and Secure Connection with Flange Ends Handwheel Gate Valve for Linear Motion Flow Control in Industries
|
...start or stop fluid flow. In service,these valves are either in fully open or fully closed position. When the gate valve is fully open, the disc of a gate valve completely removed from the flow. Therefore virtually no resistance to flow. Due to this very...
Wenzhou Xidelong Valve Co. LTD
|
Stainless Steel Flanged Rising Stem Gate Valve with Thread Position of Valve Rod
|
...gate vlave to API 600(ISO 10434) or API 6D, cast stainless steel gate valve to API 603 or API 600; Forged steel gate valve to API 602 Inspection and Test: ASME B16.5(for NPS≤ 24); ASME B16.47 series B, API 605 or ASME B16.47 series A, MSS SP-44 (for NPS bigger than 24) End flange dimension: API 598, API 600 or API 6D BW end......
Xuteng Valve Group Co., Ltd.
|
Flanged RTJ Industrial Gate Valve Class 600~2500 Pressure Seal WCB Body 13%CR
|
...Gate Valve OS&Y,Rising stem,Flexible wedge Pressure seat Bonnet,Threaded or welded seat ring ASTM A216 WCB,A217 WC6,A351CF8,A351CF8M, A351 CF3,A351 CF3M,A351 CF8M Technical parameters : Standards compliance Design and Manufacture:AMSI B16.34,API600 API6D,BS1414 Face to face(end to end):ANSI B16.10,API6D Flanged cnnection:ANSI B16.5 Butt welded end......
WENZHOU ANRY VALVE CO.,LTD.
|
Flanged Cast Steel Gate Valve ASTM A216 WCB With Rising Stem RS 150LB
|
.../wedge out of the path of the fluid. Standards Design and Manufacture: Cast steel gate valve to API 600 or API 6D; Inspection and Test: API 598, API 600 or API 6D. End flange dimension: ASME B16.5 (for NPS≤24) Face to face and end to end: ASME B16.10....
Tengs Valve International Limited
|
API 600 Flanged RF Wedge Gate Valve Supllier
|
...Flange Pressure:Ordinary Pressure Actuator:Manual Seal Surface:Wedge Gate Valve Thread Position of Valve Rod:Outside Gate Valve Characteristic:Wedge Gate Valve Design & Manufacture:API 600, Asme B16.34 Pre-Temp. Rating:Asme B16.34 Face to Face:Asme B16.10 Ends......
Hebei Lufeng Piping Equipment Co., Ltd.
|
DIN F5 Z45X NON-RISING stem flanged resilient seal gate valve
|
...flanged resilient seal gate valve These gate valves are designed and manufactured according to DIN3352 standard. F5 is the length of face to face. flanged resilient seal gate valve range: 1.Production Size:DN50-DN600mm 2.Pressure range:PN10,PN16,PN25 flanged resilient seal gate valve Standard: 1.Design Standard:DIN3352 2.Face to Face:DIN3202 F5 3.Flange Standard:EN 1092 4.Testing Standard:EN12226 flanged......
HEBEI PAWOFUOU VALVE AND PIPE FITTING TECHNOLOGY CO.,LTD.
|
Water Flange Hand Operated Gate Valve 80 Mm ACS Certificate
|
...Gate Valve Flange End DN50-DN800 1. PRODUCT PROFILE Soft seated gate valves, in ductile iron GGG40 or GGG50 with flat body and EPDM covered wedge, are suitable for drinking water applications, being coated with epoxy powder painting, not toxic. This kind of gate valves are inside screw, with non rising stem in SS420, wedge EPDM vulcanized and sliding rails on the body. The soft seated gate valves......
Anhui Prosper Flow Technology Co., Ltd
|
DIN Handwheel Flange Stainless Steel Gate Valve Non Rising Stem seated CF8M Valve
|
... specifically designed for harsh industrial environments. Manufactured in strict accordance with DIN standards, this valve ensures stable and reliable operation in various pipeline systems. Product Features Robust and Durable Material: The valve body is...
Handan Shengnada New Material Technology Co., Ltd.
|
Submit your “flange end threaded gate valve” inquiry in a minute :