Small Aperture 3NH Digital Gloss Meter NHG60M With PC Software , Gloss Measurement Units
|
... meters. Small aperture -- means that such gloss meters have a measurement aperture that is smaller than Conventional 85° gloss meter measurement aperture is 5*36mm, while the small aperture gloss meter NHG60M measurement aperture only 1.5*2mm. So named...
Shenzhen ThreeNH Technology Co., Ltd.
|
Ceramic Tile Multi Angle Gloss Meter , Gloss Measurement Units 0.5s Test Time
|
...Gloss Meter Readings With Large Battery Capacity Introduction: Gloss meters are mainly used in the surface gloss measurement for paint, plastic, metal, ceramics,granite tiles, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on. And The single angle glossmeters could be widely used for measuring......
CHNSpec Technology （Zhejiang）Co.,Ltd
|
Accurate Smart Gloss Measurement Units Three Angle With USB Data Port
|
... 85° Comply with Standard ISO 2813, GB/T 9754, ASTM D 523, ASTM D 2457 Measuring Area 20°: 10x10mm 60°: 9x15mm 85°: 5x36mm Measuring Range 20°:0~2000GU 60°:0~1000GU 85°:0~160GU Division Value 0.1GU Measurement Range Repeatability Reproducibility 0...
Beijing Silk Road Enterprise Management Services Co., Ltd.
|
Single Angle Gloss Meter For Paint Portable Gloss Measurement Units Convenient
|
...Paint and Dope surface gloss on Car, Electronic appliance and Musical instrument industry. * Measurement of floor board, marble, granite and ceramic tile gloss on architecture, decoration industry. * Measurement of printing ink and paper on Printing and...
Hunan Lingyang Electronic Technology Co., Ltd.
|
Gloss Measuring Equipment Intelligent Gloss Tester Analyzer Meter
|
.... It complies with the GB/T3891-92 standard for determining the specular glossiness of architectural facing materials. 2.Technical Parameter Parameter Specification Measurement Range 0 to 199.9 Gloss Units (GU) Accuracy ±1...
DONGGUAN LONROY EQUIPMENT CO LTD
|
GM-6,GM-26,GM-268 Integral Gloss Meter with 254 Groups Data Memorized, 0.1-200 Gloss Units Range and 20°/60°/85° Measuring Angle for Surface Gloss Measurement
|
Gloss Meter (Integral Type): Models GM-6, GM-26, GM-268 Applications Surface gloss measurement for various materials: Paint, baking varnish, coating, printing ink and other coating materials Stone, ceramic tile, section bar and other building decoration ......
Shenzhen Bestone Industrial Co.Ltd.
|
Car Paint Surface Gloss Measurement, Gloss Meter, Digital Gloss Tester RG-B206085
|
...Gloss Measurement, Gloss Meter, Digital Gloss Tester RG-B206085 Standard International standard ISO2813, ASTM-D2457, DIN67530 and China standard GB9754, GB9966, GB8807. The technical parameters follows China metrology standard JJG696-2002. Application 1. Measurement of Paint and Dope surface gloss on Car, Electronic appliance and Musical instrument industry. 2. Measurement of floor board, marble, granite and ceramic tile gloss...
RAYTECH NDT INSTRUMENT CO.,LTD
|
Precision Intelligent Glossmeter From Matt To High Gloss Measurements
|
...: This portable intelligent glossmeter has a wide range of applications from matt to high gloss measurements, with advanced touch screen technology and ideal for production and laboratory. Samples can be measured separately at each angle or at 2 or...
HUATEC GROUP CORPORATION
|
0-1000GU 60° Japan Sensor Gloss Meter Surface Gloss Measurement For Tile Electroplate Ceramics
|
...Gloss Meter OVERVIEW Gloss meters are mainly used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on. FEATURES 1). High Precision Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure high precise of the measured......
Beijing HiYi Technology Co., Ltd
|
IMUS Inertial Measurement Units For UAVs Autonomous Driving And Robotics SI-MIMU-K
|
The SI-MIMU-K Micro Inertial Measurement Unit (IMU) is a compact, high-performance, and cost-effective MEMS-based inertial sensor that measures 3D angular velocity and acceleration of moving carrier. SI-MIMU-K integrates full-temperature compensation, ......
Stable Inertial Systems Ltd.
|
Submit your “gloss measurement units” inquiry in a minute :