Narrow Spaces Elongated Handle GM8903 Hot Wire Anemometer Accurate Measurement
|
... for measurement in narrow spaces, and the handle can be elongated for suitable measurement occasions Features Hot Wire Anemometer possesses the following features: 1.Measurement of wind velocity, temperature and flow 2.Unit conversion of wind velocity,...
Shaanxi Sibeier(Sbe) Electronic Technology Co., Ltd.
|
Digital Hot - Film Anemometer Wind Speed Meter Air Velocity Wth Temperature Measurement 40m/s Data Hold To Pc Via Usb
|
...a common weather station instrument. "Anemos", meaning wind,and is used to describe any air speed measurement instrument used in meteorology or aerodynamics. Anemometers are widely used in different fields, such as heating, ventilation, air conditioning,...
Shenzhen Hicorpwell Technology Co., Ltd
|
CE Hot Wire Foam Cutter Machine , Hot Wire Foam Cutter Table
|
... high temperature melting wire for cutting, so that the cutting fracture is straight, flat, high cutting precision, no sundries. This electric hot wire foam cutting machine is a D8 series product of Rongter. Compared with the D6 series widely sold in our...
Rongter Suzhou Mechanical & Electrical Co., Ltd.
|
Precision DX8383 Hot Wire Testing Machine For Electrical Products
|
...Hot wire testing machine Introduction: The hot wire test is . The hot wire itself is actually a fixed specification resistance wire ring. During the test, it needs to be heated to the specified temperature by electricity, so that the top of the hot wire contacts the sample for the required time, and then its state can be observed and measured. The testing range depends on the specific test procedure. Scope of application: The hot wire...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
UL746A ZY6055 Wire Testing Equipment Hot Wire Tester Machine IEC 60695
|
... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts ......
Dongguan HOOHA Electrical Equipment Company Limited
|
0.4mm Nicr Alloy Bright Wire Nickel 60% For Hot Wire Foam Cutters
|
..., Electroloy, Nichrome, Alloy C, Nikrothal 6, MWS-675, Stablohm 675,NiCrC. The Tension Factor All metals expand with heat so the nichrome wire at cutting temperature also expands and gets longer. Because of this, some method of keeping tension on the...
Shanghai Tankii Alloy Material Co.,Ltd
|
Standard GB5169 Glow Wire Test Apparatus , Hot Wire Ignition Test Flammability Temperature Test
|
... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
IEC60695-2-20 Hot Wire Ignition Tester Flammability Testing Equipment
|
...Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Household Appliance Materials Hot Wire Ignition Independent Exhaust Tester With Electrical Control
|
...requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors....
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60695-2-20 Hot Wire Ignition Test Apparatus , Fire Hazard Testing Equipment
|
...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot...
Pego Electronics (Yi Chun) Company Limited
|
Submit your “gm8903 hot wire anemometer” inquiry in a minute :