Different Size Hardface Material Tungsten Carbide Powder Yg8
|
...Carbide Crashed Grits: Different Size Hardface Material Carbide Powder Yg8 Tungsten carbide grits also called tungsten grits,carbide grits,it is used to welding or solder onto a steel body, to increase thewear resistance properties. For example, if a steel cutter can cut 24 hours without grits, it will cut 240 hours after with the tungsten carbide grits. Product Name pure Carbide Crashed Grits Material 99.90% tungsten......
JOINT CARBIDE CO., LTD.
|
PTA-Hardfaced Tungsten Carbide Radial Bearings for High Load Applications
|
... wear resistance and load capacity are critical. These bearings incorporate a Plasma Transferred Arc (PTA) welding process to apply a robust hardfacing layer of tungsten carbide onto key surfaces. This technique results in a...
Chengdu Minjiang Precision Cutting Tool Co., Ltd.
|
Hardfacing Tungsten Carbide Wear Parts For Bucket
|
Hardfacing with tungsten carbide wear parts for bucket Product Description Good, sharp bucket teeth are essential for ground penetration, enabling your excavator to dig with the least possible effort, and hence the best efficiency. Using blunt teeth ......
Changsha Vibo Wearable Material Co., Ltd.
|
Wc-12co 1342VM Woka3102 Tungsten Carbide Powder For Thermal Spraying Carbide Metal Water Conservancy Carbide Metal
|
Wc-12co 1342VM Woka3102 Tungsten Carbide Powder For Thermal Spraying Carbide Metal Water Conservancy Carbide Metal Product Description 88WC-12Co is a tungsten carbide powder for HVOF thermal spray coatings. It has performance feature such as Low ......
Changzhou WL Allotech Material Co.,Ltd
|
Wear Resistant Tungsten Carbide Strips With 100% Tungsten Carbide Powder Material
|
...Tungsten Carbide Strips With 100% Tungsten Carbide Powder Material Tungsten Carbide Strips Description: Tungsten Carbide Strips shows all the superiorities of tungsten carbide, such as good wear and corrosion resistance, high toughness, etc. Precisely speaking, its chemical composition is mainly tungsten carbide powder, with Co or Ne as its binder. Tungsten Carbide......
Zhuzhou Gold Sword Cemented Carbide Co., Ltd.
|
100% Virgin 8.0mm Tungsten Carbide Hardfacing Tungsten Carbide Scrap
|
Tungsten Scrap Carbide Composite Welding Rods For Junk MillsAnd Welding Production Description The Composite Alloy Rods are normally applied using a large oxy-acetylene torch, in conjunction with a range of our brazing fluxes or with our gas flux system where the flux is introduced to the gas before the flame, thus making it easier for the operator to place the cutting carbides......
JWE CARBIDE CO., LTD.
|
Rare Metals WC Tungsten Carbide Powder Wear Resistant For Cutting Tools
|
...tungsten powder spot goods high quality outlet Brief introduction Tungsten carbide powder (WC) is the main raw material for the production of cemented carbide, metallic luster, hardness similar to diamond, as a good conductor of electricity and heat, tungsten carbide insoluble in water, hydrochloric acid and sulfuric acid, easily soluble in nitric acid - hydrofluoric acid mixture. Pure tungsten carbide......
Luoyang Forged Tungsten-Molybdenum Material Co., Ltd.
|
60-150 Welding Current Tungsten Wire for Cast Tungsten Carbide Powder 0.1mm Tolerance
|
...Tungsten Products Tolerance: + / - 0.1mm Technique: Forging, Rolling, Sintering, Spinning Welding Current: 60-90,90-120,120-150 Biocompatibility: Excellent Trial Order: Accepted Related Products: Cast Tungsten Carbide Powder Industrial Metal Powder Industrial Metal Powder......
Baoji City Changsheng Titanium Co.,Ltd
|
Agglomerated Sintered Tungsten Carbide Powder WC-20CrC-7Ni
|
Tungsten Carbide Powder WC-Cr-Ni 73-20-7 Grade T.C Ni Cr Fe Process BD-10401 5.8-6.4 6.0-8.0 20.0-23.0 ≤0.5 Agglomerated & Sintered Particle Size Micron Apparent Density g/cm3 Hall Flow S/50g Appearance 53-20 > 4.0 ≤18.0 Spherical 45-15 45-11 38-10 PRODUCT OVERVIEW WC-CrC-7Ni 73-20-7 is a tungsten carbide – chromium- nickel powder......
Zhuzhou Jiangwu Boda Hard-Facing Materials Co., Ltd.
|
Custom Cemented Tungsten Carbide Sleeve with 100% Pure Tungsten Carbide Powder and YG8/YG9C/YG11C Grade for High Wear Resistance
|
Products Description Product Paramenters Grade Composition(% in weight) Physical Properties Grain size(μm) Densityg/cm³(±0.1) HardnessHRA(±0.5) TRS Mpa(min) Porosity WC Ni Ti TaC A/B/C KD115/YG6X 93.5 6.0 - 0.5 14.90 93.0 2700 A02/B00/C00 0.6-0.8 KD335/......
Chengdu Kedel Technology Co.,Ltd
|
Submit your “hardfacing tungsten carbide powders” inquiry in a minute :