Coupler 155°C Heating Resistance Test Device IEC 60320-1 Figure 13
|
...Heating Resistance Test Device Equipment overview: The coupler heating test device is designed and manufactured according to IEC60320-1 clause 18.2 and figure 13. It is used to check the heat resistance of coupler in hot conditions and severe hot conditions.This device is built-in temperature control, precise digital display and durable. Technical Characteristics: Test station Single Control method Electrical Heating......
Sinuo Testing Equipment Co. , Limited
|
Laminated Glass Heat Resistance Testing Machine Boiling Resistance Test Chamber Boiling Resistance Test Cabinet
|
... in accordance with the national standard GB15763 "Laminated Glass". This device is mainly used to test the heat resistance of laminated glass. It is applicable to both architectural and automotive laminated glass. Place the sample in the...
DONGGUAN LONROY EQUIPMENT CO LTD
|
Plug Pins Insulating Sleeves Abnormal Heat Resistance Testing Machine IEC60884-1 Figure 40
|
... heating resistance and burning resistance of bolt and plug with insulation sleeve. It can imitate the insulated parts of which the plug-and-socket device’s safety performance may be damaged by electric heat stress. It should not be over damaged for...
Guangzhou HongCe Equipment Co., Ltd.
|
GB3048 General Conductor Resistance Test Device High Accuracy Kingpo
|
...Resistance Test Device Product information: This device is the special appliance used for measuring the conductor resistance. It is applicable not only for the electrical wire whose length is 1 meter, but also the length of thousands meters. The design principle and the measurement accuracy completely conform to the standard requirement of GB3048. Technical parameters: 1) Power supply:AC 220V 50Hz; 2) Resistance...
KingPo Technology Development Limited
|
Wire And Cable Heat Release Test Device
|
... of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 details the apparatus and the arrangement and calibration of the instrumentation to be...
SKYLINE INSTRUMENTS CO.,LTD
|
Surface Electrical Resistivity Testing Device 3D Resistivity Meter Imaging Underwater Gold Geophysical Exploration Equipment
|
...increase the depth of detection and scanning area. A 30-meter electrical resistivity survey measurement cable allows scanning of large targets up to 30 meters in depth over a 1000 m2 area. An important feature of the adrenalin geophysical device is its...
Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd
|
Red Heat Resistant Silicone Rubber Electrical Tape For Cable Insulation Protection
|
|
...Heat Resistant Silicone Rubber Electrical Tape For Cable Insulation Protection Product name Length (±0.05)M Width (±1.5)mm Thickness (±0.05)mm Parameters Heat Resistant Silicone Rubber Electrical Tape 5 50 0.5 See below chart Heat Resistant Silicone Rubber Electrical Tape 5 50 0.8 See below chart Heat Resistant Silicone Rubber Electrical Tape Technical Parameters: No. Items Test......
HENGYANG ZK INDUSTRIAL CO., LTD
|
Radiant Heat Flux Test Device For Floor Covering Materials For Testing Flooring Materials
|
.... Suitable for all kinds of flooring materials. Such as: textiles, carpets, cork, wood, rubber sheets and plastic flooring and floor spraying materials. The device can react to the...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Protective Clothing EN 366 Radiant Heat Resistant Test Equipment
|
...Heat Resistant Test Equipment Catalogs for EN 373&348&6942&367&702.pdf Introduction It is suitable to determine heat radiation resistance or thermal conductivity of protective gloves and protective clothing. Feature 1. Radiation source is made up of 6 groups heating bar,length of heat bar is 356mm±2mm,and the length of heating part is 178±2mm,diameter of heating......
Advanced Instruments Co.,Limited
|
IEC60695-2-13 Glow Wire Testing Equipment Heat Resistance Test Apparatus
|
... index (GWFI) test method for materials” IEC60695-2-13 “Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials” IEC60695-2-10 “Fire hazard testing - Part 2-10:...
Sinuo Testing Equipment Co. , Limited
|
