20mil RT/Duroid 6035HTC High Frequency Rogers PCB Board For Power Amplifiers
|
...Rogers High Frequency PCB Built On 20mil RT/duroid 6035HTC with Immersion Gold for Power Amplifiers (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) RT/duroid 6035HTC high frequency circuit materials of Rogers Corporation are ceramic filled PTFE composites for use in high......
Bicheng Electronics Technology Co., Ltd
|
High Frequency Rogers PCB Prototype Board OSP / HASL / ENIG Durable
|
High Frequency Rogers PCB Prototype 4050B 4003 5880/Rogers/Arion/Taconic/ENIG/HASL/OSP The Rogers PCB prototype we provide is very durable, stable, and reliable, attracting the attention of many experts in the field and winning recognition from customers worldwide. Rogers PCB Prototype Features: Less dielectric loss. Low loss of electrical signal. Large range of values. Low-cost circuit manufacturing. Low outgassing for space applications. Rogers...
GT SMART (Changsha) Technology Co., Limited
|
High Frequency Rogers Pcb With Microwave Widely Used In Antenna and RF System
|
... Silver Features: Rogers pcb multilayer pcb with high frequency can improvide the products quality ,with high techolonogy treatment improve the life cycle of the products .Immersion gold surface finish make the pcb 's conductive performance enhancements....
Shenzhen Xinchenger Electronic Co.,Ltd
|
High Frequency Rogers Pcb Board Double Sided Immersion Gold Pcb 1.6mm
|
High Frequency Rogers Pcb Board Double SidedImmersion Gold Pcb 1.6mm High Frequency PCB Double Sided High Frequency Printed Circuit Immersion Gold Pcb Custom PCB Board Double Sided High Frequency Printed Circuit A high frequency printed circuit board, whether it’s rigid or flex, offers faster signal flow rates and a frequency range of up to 100 GHz. It’s important to note that there are numerous materials designed to operate at high frequency...
Huashengxin Circuit Limited
|
High Frequency Rogers Flexible PCB Prototype Board Fabrication
|
Rogers, high-frequency mixing plate prototype processing Essential details Place of Origin: Guangdong, China Base Material: FR4/High TG FR-4/M4/ M6/Rogers/Nelco/Isola Copper Thickness: 1 - 4OZ Board Thickness: 0.2 - 4mm Min. Hole Size: 0.15mm Min. Line ......
ShenZhen Jieteng Circuit Co., Ltd.
|
OSP ENIG Surface High Tg PCB High Frequency Rogers 5880 PCB
|
High Tg board High frequency Rogers 5880 PCB factory PCB Capability Item Rigid PCB Max Layer 8L Inner Layer Min Space ......
Guangzhou Highleap Electronic Co.,Ltd.
|
Rogers RT/duroid 6010.2LM High frequency PCB single-layer, double layer, multilayer, hybrid PCB
|
... (7) RT/duroid 6010.2LM High frequency PCB Introduction Rogers RT/duroid 6010.2LM laminates are ceramic-PTFE composites specifically engineered for electronic and microwave circuits that demand a high dielectric constant. With its high dielectric constants......
Shenzhen Bicheng Electronics Technology Co., Ltd
|
Millimeter Wave High Frequency PCB Rogers Rt Duroid 5880 Substrate Thickness 0.6mm
|
Rogers RT / Duroid 5880 High Frequency Printed Circuit Board Rogers RT / Duroid 5880 High Frequency Printed Circuit Board is a high-frequency circuit board developed and produced by Shenzhen Quanhong Electronics Co., Ltd. It is produced by using high-frequency material Rogers RT / Duroid 5880 and surface gold deposition technology. The minimum line width and line spacing can reach 100 / 100um and the minimum aperture can reach 0.3mm. The high...
Quanhong FASTPCB
|
4L plate thickness 1.60mm;Rogers 4350B, minimum hole 0.40mm,High Frequency PCB,high frequency pcb design,rogers pcb
|
...; Size: 27*23mm/1PCS Process structure: Rogers 4350B, minimum hole 0.40mm, copper thickness 1OZ, impedance Ω ± 10%, minimum hole 0.35mm Surface treatment: full-......
Shenzhen Chaosheng Electronic Technology Co.,Ltd
|
Electronic High Frequency PCB Rogers Ro4003c 1.6 MM 0.2mm Mechanic Drill
|
Shenzhen Manufacturer Rogers Ro4003c 1.6 MM Electronic High Frequency PCB Product Description Item High Frequency PCB Board Material Rogers, Taconic, PTFE,Teflon,Mixmaterial Board thickness 0.15-4.5mm Layers 2-48L Copper thickness 1-3 oz Cu Min via 0.......
Shenzhen Fany Technology Co.,Ltd
|