DIN 3202 F6 Swing Type Check Valve Rubber Metal Seal Material
|
...valve stem and spring and other important parts, and the use of thin lightweight design.Because the closing stroke of the valve plate is shortened and the spring action can accelerate the closing effect, water hammer and water hammer sound can be reduced....
SHANGHAI HAIJI IMPORT&EXPORT CO.,LTD
|
Din 3202 F6 Ductile Iron Check Valve 4 Inch For Sewage Treatment
|
DN50-DN300 PN10/PN16 Ductile Iron Ball Check Valve 1. PRODUCT PROFILE A Ball Check Valve is a resilient seated ball check valve with a sinking ball* to prevent back flow and allowing flow passage with minimum friction loss. The full-ported valve seat is ......
Anhui Prosper Flow Technology Co., Ltd
|
Clamp Rubber Duckbill Check Valve Automatic Backflow Preventer Epoxy Fusion Coating
|
Rubber Sewage Disposal Duckbill Check Valve Pressure and temperature working pressure PN10/PN16/PN25 testing pressure Shell: 1.5 times rated pressure, Seat: 1.1 times rated pressure. working temperature -10°C to 80°C (NBR) -10°C to 120°C (EPDM) suitable media Water, Oil and gas. Main material list part material body Chloroprene rubber, Neoprene, NBR & EPDM rubber, etc. seat ring NBR / EPDM seat metal Introduction of rubber duckbill check valve...
Shanghai Songjiang Jingning Shock Absorber Co.,Ltd.
|
GJS500-7 EPDM Rubber Disc Check Valve For Sewage System
|
... valve with reliable back flow stopping, applicable for both clean and sewage water nets. A 40 degree angle tilted seat design helps close very soon for shorter stroke and minimize the water hammer and slamming for lower stroke and flap above water flow....
Suzhou Alpine Flow Control Co., Ltd
|
GGG40 Flange Type DN1200 Resilient Seated Check Valve
|
...Valve Flange Type DN40 ~ DN 1200 Durable Resilient Seated Check Valve Characteristics: 1,the bottom of the pipe diameter the same light hearth seat design, does not produce debris siltation, more reliable seal. 2,the valve plate with the overall quality of rubber coated,advanced rubber vulcanization after curing technology allows the gate to ensure accurate geometry, and rubber and ductile iron covered with solid, not falling. 3,the valve...
Shanghai kangquan Valve Co. Ltd.
|
Energy Saving Float Control Valve Durable Rubber Disc Check Valve
|
...Rubber Disc Check Valve, Float Control Valve, PN10/16/25 1, PRODUCT DESCRIPTION: The material of Rubber Disc Check Valve: of DIN standard Bellow Globe valve for PN16 Partes name material Body Ductile Iron Bonnet Ductile Iron Disc Ductile Iron Seat Rubber The performance of DIN standard Bellow Globe valve for PN16 Type nominal pressure Testing pressure Suitable temperature Suitable medium Strength Enclose (water)Mpa (water)Mpa Rubber...
ANHUI SIFA VALVE.CO., LTD.
|
High pressure API 598 HQ41X stainless steel sliding ball wafer check valve
|
... the ball can slide up and down in the integrated chute in the body to open or close the valve without any noise and water-hammering and good sealing capability The bore is full without any block so the flow rate is much with little resisting force and...
Hontai Machinery and equipment (HK) Co. ltd
|
EN 1092-1 Metal Seat Ansi 150 Thread Flange Check Valve
|
...: Epoxy Powder Dimensions: DIN 3202/2-F6 Flange Dimensions: DIN 2501 (Flange)TS ISO 7005-2 Details: Size: DN80 Pressure: PN25 Body/Bonnet: A216 WCB Disc:A216 WCB+13Cr Seat: A105+13Cr Bolted Bonnet Design The pressure of the...
TOBO STEEL GROUP CHINA
|
Swing Type Cast Iron Valves DIN Standard Ductile Iron Check Valves DIN3202-F6
|
...Check Valve DIN3202-F6 PN16/PN10 The Check Valve is a valve that maintains fluid-flow constantly in a constant direction. It has a function to prevent backflow. disc is pushed open by the fluid pressure, but when it flows backward, disc closely contacts seat of the body by the back pressure to prevent backflow. Swing Check Valves......
MAASU CO., LTD
|
DN200 PN16 GGG50 DIN swing check valve
|
...check valve Speficiations 1.Production Size:2”-24” DN50-DN600mm 2.Pressure:PN16 DIN swing check valve Standard: 1.Design Standard:DIN 2.Face to Face:DIN3202 F6 3.Flange Standard:EN 1092-2 4.Testing Standard:ISO 5208 DIN swing check valve main material of parts: 1.Body:EN-GJL-250 2.Bonnet:EN-GJL-250 3.Stem:2Cr13/SS304/SS316/Carbon Steel 4.Stem Nut:brass 5.Disc:EN-GJL-250 6.Seat......
HEBEI PAWOFUOU VALVE AND PIPE FITTING TECHNOLOGY CO.,LTD.
|
Submit your “hq41x f6 rubber seated check valve” inquiry in a minute :