Home > Electrical Equipment & Supplies > Electrical Instruments > Resistance Meters >

Iec 30r Min Abrasion Resistance Tester

1-10 Results for

iec 30r min abrasion resistance tester

from 24 Products

IEC 30r/Min Current Carrying Hose Abrasion Resistance Tester

...Abrasion Resistance Tester With 30r/min Crank speed Standard: IEC60335-2-2 ‘Household And Similar Electrical Appliances - Safety - Part 2-2: Particular Requirements For Vacuum Cleaners And Water-Suction Cleaning Appliances’ clause 21.102 figure 101. Application: Suitable for the Current-carrying hoses abrasion resistance tester......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

300mm Current - Carrying Hoses Abrasion Resistance Tester 30r / Min Crank Speed

...easy to cause abrasion. The abrasion resistance of the current carrying hose is one of the very important indicators. In order to improve and ensure the quality of the current carrying hose, the abrasion resistance of the current carrying hose needs to be...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Abrasion Resistance Tester of IEC 60335-1 and IEC 60950

Abrasion Resistance Tester of IEC 60335-1 and IEC 60950 Specification: 1) According to IEC 60950 figure 2K and clause2.10.8.4, IEC 60335-1 clause 21.2. 2) Abrasion Resistance Tester is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. 3) Abrasion resistance tester......

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

IEC 60950-1 clause 2.10.8.4 Automatic Abrasion Resistance Tester / Printed Circuit Abrasion Strength Device

... pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests. Technical Parameters: 1. As per clause 2.10.8.4 of IEC 60950-1/IS...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

400mm/Min 50W Abrasion Testing Machine , Abrasion Resistance Tester For Tissue

400mm/Min 50W Abrasion Testing Machine , Abrasion Resistance Tester For Tissue Application Absorption Rate Tester for absorption rate of various sanitary napkins, pads, etc. Technical parameters Technical Index HD-W272 Dosing amount 0.1~10.0ml ......

Haida Equipment Co., Ltd

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

IEC 60320-1 Clause 8.8 Abrasion Resistance Test Machine Stickers Label Ink Rub Tester

IEC 60320-1 Clause 8.8 Abrasion Resistance Test Machine Stickers Label Ink Rub Tester Standards: This label marking abrasion test apparatus conforms to IEC60320-1 clause 8.8, IEC 60335-1 clause 7.14, IEC 60065:2014 clause 5.1, IEC 60950:2013 clause 1.7.11, IEC......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Akron Abrasion Tester To Measure Abrasion Resistance Of Out - Sole Material

...Abrasion Tester Product information To measure abrasion resistance of out-sole material This tester is designed to use together with a special balance for testing the abrasive consumption for the rubber products such as sole. Tire, belt of tank etc. Specification Specimen 63.5mm,X12.7mm X12.7mm L 220mm, hardness 60-70 Grinding Wheel D150mm,W25mm, Specimen Rotating Speed BS 250±5r/min, GB76±2r/min......

SKYLINE INSTRUMENTS CO.,LTD

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

AC 220V 50Hz Accelerated Aging Test Chamber 0.9r/Min Wear Resistance

DIN Rubber Abrasion Resistance Tester Plastic And Rubber Test Equipment Description: DIN Abrasion Test Machine For Rubber Plastic Leather is to test the friction of surface by a particular piece of sandpaper, After friction for a certain time, and then ......

DONGGUAN YUYANG INSTRUMENT CO.,LTD

Address: 1207 International Commercial Building, No.81, Hongfu West Road, Nancheng District, Dongguan City, Guangdong Province, China

Abrasion Resistance Furniture Testing Machines For Office Chair Castor With Caster

Abrasion Resistance Furniture Testing Machines For Office Chair Castor With Caster Application: Office Chair Castor tester applies to pedestal base chairs with casters, to evaluate the ability of the chair base and casters to withstand fatigue stresses and wear caused by moving the chair back and forth. Circular plate, 750mm diameter, rotates at a speed of 20 r/min......

Dongguan Haida Equipment Co.,LTD

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

Lube Oil Testing EquipmentIntegrated Design of SRH Simple Lubricating Oil Wear Resistance Tester

Lubricating oil anti-wear testing machine parameters: Voltage AC 220V±5% 50-60HZ Power 120W Loading method weight and lever loading Steel ball 14*14 Motor speed 1400r/min Maximum load 156KG Packing method exquisite solid wooden case Size 340 * 200 * 170mm ......

Shandong Shengtai instrument co.,ltd

Address: Times Headquarters Base, Tianqiao District, Jinan City

Submit your “iec 30r min abrasion resistance tester” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Shandong Shengtai instrument co.,ltd Products: Lube Oil Testing EquipmentIntegrated Design of SRH Simple Lubricating Oil Wear Resistance Tester
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec 30r min abrasion resistance tester” inquiry

*From:
Your email address is incorrect!
To: HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0