IEC 60061-3 Lamp Holder Go Gauge E14/ 26/ 27/ 39/ 40 Check Dimensions Of Lamp Holders
|
IEC 60061-3 Lamp Holder Go Gauge E14/ 26/ 27/ 39/ 40 Check Dimensions of Lamp Holders Product information: The lamp holder “Go” and “Not Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2. These lamp holder gauges are used to check whether the dimensions and shapes of the lamp holders meet standard requirements by using the lamp holders interchangeable size gauges......
Sinuo Testing Equipment Co. , Limited
|
IEC 60061 3 Test Gauges For Lamp Holders E27 Calibration Certificate
|
IEC 60061 3 Test Gauges For Lamp Holders E27 Calibration Certificate IEC60061-3 GAUGE FOR LAMPHOLDERS E27 GAUGE FOR LAMPHOLDERS E27 Gauge Type: GAUGE FOR LAMPHOLDERS E27 Reference Standard: IEC60061-3 Place of Origin: Guangdong, China (Mainland) Brand Name: SHC Model Number: GAUGE FOR LAMPHOLDERS E27 KP-E27H1 IEC60061-3,7006-25A-2 “GO” GAUGE FOR LAMPHOLDERS E27 KP-E27H2 IEC60061-3,7006-26-4 NOT GO GAUGES......
Dongguan Kingpo Technology Limited
|
High Accuracy Light Testing Equipment IEC 60598 1 Lamp Caps Test Sample
|
...Gauges for Lamp Caps and Holders HDJ0001 Standard: IEC 60598-1: Luminaires - Part 1:General requirements and tests; IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Application: These gauges are for the control of interchangeability and safety of lamp caps and holders. Test sample: Lamp caps and holders......
shanghai kerang technology co ltd
|
IEC 60061-3 7006-4B-1 B22d Lamp Cap Gauges for Testing the Retention of Caps in the Holder
|
.... Testing: The cap of the lamp shall enter the gauge from surface X, until the pins have passed through slots Q. The caps is then turned through 90°for one pin to enter the gauged pin slot. With a slight pull the pin shall not pass surface Y. The...
HK LEE HING INDUSTRY CO., LIMITED
|
E27 Lamp Cap Gauge For Finished Lamps Iec 60061 3 Standard Hardness Steel Material
|
E27 Lamp cap gauge | Gauge For Finished Lamps Fitted With E27 Caps For Testing Contact Making | 7006-50-1 Purpose:To check lamp dimensions for contact making in I.E.C holders. LED Lamp Cap Gauge Series: IEC60061-3, 7006-27B-1 "Go"gauges for E40......
KingPo Technology Development Limited
|
Lamp Cap Go And Not Go Gauge E40 E39 E12 GX53 IEC60061-3 With Calibration Certificates
|
...Lamp Cap Go and Not Go Gauges E40, E39, E12, GX53 with Calibration Certificates 1. Introduction Lamp Cap Go Not Go Gauges are designed according to IEC 60061-3, which specifies the form, dimensions, purpose of use and inspection of gauges for the interchangeability of the relevant lamp caps and lamp holders. The "Go" and "Not Go" gauge is a type of precision gauge, the structure and sharp (like thread waveform) of gauges for lamp......
Pego Electronics (Yi Chun) Company Limited
|
Submit your “iec 60061 3 lamp holder go gauge” inquiry in a minute :